Specifications

416 VisualSonics Vevo 2100 Imaging System Operator Manual Rev 1.1

Appendix C: Descriptions of control panel controls

Useful when you suspect, for example, that color data is covering over the actual

contour of a vessel wall. In this case you would lower the priority until the

overlay data matches the actual tissue contour and properties.

Activates PW Doppler Mode acquisition. Press to begin displaying the yellow PW

Doppler Mode sample volume, press

Update

to display the live PW Doppler

Mode spectral data in the lower window and the live B-Mode data in the scout

window, then press

Simul

Report

Displays the Measurement/Analysis report page for the selected studies or series.

Save Preset

Opens the Save Preset Settings dialog box so you can label and save the current

image acquisition parameters as a single preset in the current imaging mode.

Scan/Freeze

During image acquisition, toggles between acquiring image data and freezing the

acquisition. When you freeze the acquisition the system stores cine loop data if

you select Auto SAVE on Image Label in the General tab of the Preferences

window.

During image analysis, starts and stops data playback.

Screen Keys

Push dial control to cycle through options for the current imaging mode.

In B-Mode: Toggles the needle guide display on and off during an injection

imaging session.

In Color Doppler Mode, Power Doppler Mode, Contrast Mode: Cycles through

three image states: Overlay + B-Mode, B-Mode only, overlay only.

Select

This control is the equivalent of the left button on a computer mouse. When a

procedure in this documentation directs you to click, press this control.

Note: When the manual directs you to right-click, press

Update