Specifications

Rev 1.1 VisualSonics Vevo 2100 Imaging System Operator Manual 41
Chapter 5: Logging on
Logging on
This chapter walks you through the procedures for logging on to the system and
selecting yourself as the active operator.
In this chapter
Logging on the very first time the system is used ............................................................41
Logging on for a typical session..........................................................................................42
Logging on the very first time the system is used
When you are the first person ever to log on to the Vevo 2100 Imaging System,
the logon procedure is different than the standard logon for a typical session. This
is because no-one has added any administrator profiles or operator profiles yet.
f To log on the very first time the system is used:
1. On the back of the control panel module turn on the Main Power switch.
2. On the left side of the control panel module turn on the Computer Standby
switch.
 The control panel lights turn on.
 The Vevo 2100 Imaging System software starts and displays the
acquisition Presets dialog box
3. In the Application list, select the application package you want to work with.
4. Click OK.
You can now start a new acquisition session.
You should add an administrator now and then add the operators.
Chapter 5