Specifications

406 VisualSonics Vevo 2100 Imaging System Operator Manual Rev 1.1

Appendix C: Descriptions of control panel controls

Descriptions of control panel controls

This appendix lists all available controls in alphabetical order and describes the

function of each control.

2D Gain

Adjusts the strength of the ultrasound signal when it returns to the face of the

transducer. Range values for the control are specific to each individual

transducer.

Turn clockwise to add gain and brighten your entire image. Turn

counterclockwise to reduce gain and darken your image.

In M-Mode: Applies to the images in both the M-Mode window as well as the B-

Mode scout window.

Active during: B-Mode, M-Mode, Contrast Mode, Color Doppler Mode and

Power Doppler Mode.

Activates 3D-Mode acquisition and opens the dialog box you use to set up the 3D

motor stage and the transducer settings for the image slices that will create the 3D

data.

Annotate

Opens the text annotation tool if the cursor is not enabled.

Back

Will remove or undo the last measurement point before you commit your

measurement.



Press and hold

while you tap this Up arrow key to increase the keyboard

backlighting brightness between the Off setting and a series of seven brightness

levels.

º + 

Appendix C