Specifications

Rev 1.1 VisualSonics Vevo 2100 Imaging System Operator Manual 35
Chapter 4: How the Vevo 2100 Imaging System works
CAUTION: Before connecting the system ensure the voltage is
correct. Ensure the power cable is undamaged before plugging the
system directly into the wall outlet. Use of an extension cord or a
power bar is discouraged.
The voltage is specified on the power connection plate on the rear panel of the
system.
f To turn your system ON:
1. On the rear panel, push up the Main Power switch. This connects the system
to the power source and turns on the internal fans, but it does not turn on the
control
2. On the left side of the control panel module, press the Computer Standby
switch. This is a toggle switch, so when you press it, it does not stay pushed in
like a light switch. Instead it returns to its original position. This is normal.
The system starts the control panel backlights, the display monitor and the
computer operating system.
f To turn your system OFF:
1. Ensure that you have stored all the image data that you are working on.
2. Press the Computer Standby switch.
The computer shuts down, the monitor powers down, and the control panel
backlights turn off. The fans continue to run.
3. If you need to turn off all power to the system:
a. Let the fans run for 10 minutes to safely cool down the internal
components.
b. Push down the Main Power switch.
Related information
 Plug (page 27)