Specifications

334 VisualSonics Vevo 2100 Imaging System Operator Manual Rev 1.1
Chapter 46: Analyzing Power Doppler Mode images
2. In the physiology data trace window below the image mode data, click to
place the initial caliper.
3. Trackball to the location where you want to place your end caliper and then
click to place the caliper.
4. If you need to move the entire measurement, click on a measurement line and
then drag and drop it.
Related information
 Complete procedure for adding a measurement (page 166)
Linear distance measurement
Linear distance is measured in mm.
f To place a linear distance measurement:
1. Click the linear distance measurement button .
2. Click on your image to place the initial caliper.
3. Trackball to the location where you want to end your measurement and then
click to place the end caliper. If you selected the Show Values and Labels
option in the Measurements tab of the Preferences window, the system
displays the measurement value and editable label for the measurement.
4. If you need to move the entire measurement, click on a measurement line and
then drag and drop it.
Related information
 Complete procedure for adding a measurement (page 166)
Traced distance measurement
Traced distance is measured in mm.
f To place a traced distance measurement:
1. Click the traced distance measurement button .
2. Click on your image to place the initial caliper.
3. Trackball along the contour of your target tissue and then right-click to place
the final caliper of your trace. If you selected the Show Values and Labels
option in the Measurements tab of the Preferences window, the system
displays the measurement value and editable label for the measurement.
4. If you need to move the entire measurement, click on a measurement line and
then drag and drop it.