Specifications

Rev 1.1 VisualSonics Vevo 2100 Imaging System Operator Manual 31
Chapter 3: Quick Start Tutorial
 The system creates a date-stamped new study for you as well as the first
image series set, Series 1.
 The system stores a date-stamped cine loop of the B-Mode data you are
acquiring
8. Press
Scan/Freeze
again to resume the data acquisition.
9. Continue freezing and storing as required.
10. Press
Study Management
.
The Study Browser window appears and displays the new date-stamped
study, new date-stamped study series and the new time-stamped images.
You can now analyze the image data.
11. In the Name column, double-click the Series 1 row.
The review panel displays thumbnails of the images you stored.
12. Double-click the first thumbnail.
The B-Mode window appears and plays the cine loop you stored.
13. Using the
Cine Loop Review
dial:
a. Turn the dial counter-clockwise to slow the loop down until you reach
your desired playback rate
b. Press down on the dial to toggle the cine loop to stop.
c. Turn the dial one way or the other to control the movement of the cine
loop frame by frame.
14. Press
Measure
.
The measurement tools appear near the top of the left panel.
15. In the measurement packages list box:
d. Click the appropriate measurement package for your study. For example,
click Embryology Package.
The system displays the list of available measurement protocols.
e. Click the appropriate protocol. For example, click Placenta.
Under the protocol label, the system displays the list of predefined
protocol measurements.
f. Click the appropriate measurement. For example, click Placenta Sag.
The list box becomes a preview panel and the system highlights the icon
for the measurement tool that the system uses for the protocol
measurement. For the Placenta Sag measurement, the system uses the
Linear tool.
16. In the image area, place and complete your measurement.