Specifications

290 VisualSonics Vevo 2100 Imaging System Operator Manual Rev 1.1
Chapter 42: Analyzing 3D-Mode images
Coronal View
Click to display a straight-on perspective of the x-z
plane image slice, displayed on the Cross view as
the plane outlined in red.
Surface View
Click to display a compilation view that uses the
Cross view to map operator-generated volumes to
the acquired data.
Toggle Overlay
Click to cycle through the three overlay states:
 Overlay + B-Mode
 Overlay
 B-Mode
Manipulating 3D-Mode image data
This section describes how to use the 3D-Mode tools to better define and visualize
specific areas in the image.
Rotating an image
You can rotate an image when you are in Cube view, Cross view and Surface
view.
f To rotate an image:
1. Position the trackball cursor outside the volume, and then left-click.
2. Drag in any direction.
3. Left-click to stop the rotation.
Panning an image
f To pan an image:
1. Position the trackball cursor in the image pane.
2. While pressing the Shift key, left-click and drag in any direction.
3. Left-click to stop the panning.