Specifications

Rev 1.1 VisualSonics Vevo 2100 Imaging System Operator Manual 285
Chapter 41: Acquiring 3D-Mode images
4. Close the moving arm of the clamp and then pull the latch down to the 45º
notch. This transducer rotation lock setting holds the transducer but provides
enough freedom for your to rotate it.
5. To set the transducer to any of the at the desired 90-degree angle in the clamp
turn the transducer until you feel the collar snap into position.
6. Close the clamp and push the latch down until it locks into place as shown in
the following illustration.