Specifications

280 VisualSonics Vevo 2100 Imaging System Operator Manual Rev 1.1
Chapter 41: Acquiring 3D-Mode images
Area Description
Active pane menu drop-down icon. When you are in the cube view, click to display the
available commands that apply to the image in the active pane. Not all panes include the
same commands. The following table describes all the available commands:
Command Description
Wire-frame Turns the image outline on/off
Orientation Turns the orientation marker points on/off
Restore Resets the original view of the 3D image including size, orientation, brightness and zoom values.
Active pane previous/next slice tool. Click < to view previous slices in your 3D image.
Click > to view the next slices. You can use the following keyboard combinations to move
forward or back one slice at a time, five at a time, or ten at a time, as detailed in the
following table:
Command Step size
> 1 slice
Shift + > 5 slices
Ctrl + > 10 slices
Unique image view. Each pane displays a unique view of the 3D image. When you click a
different view icon in the image analysis tool bar to change the view, the system
visualizes the same slice from a different perspective.
Visualization options tool bar. Click the appropriate analysis tool to change either the
number of panes or the analysis view. For complete information on each tool see 3D-Mode
image analysis tools (page 288).
Live physiological display. If the animal is connected to the physiology controller, data
appears here in real time during image acquisition and can display the numeric values of
the animal's heart rate, respiration rate, blood pressure and body temperature. This area
also displays the image data storage capacity progress bar so you can see when you
should start to back up your image data to free up space on the system. Live physiological
data is only active when you enable the inputs in the General tab of the Preferences
window.