Specifications

202 VisualSonics Vevo 2100 Imaging System Operator Manual Rev 1.1
Chapter 34: Analyzing B-Mode images
Analyzing B-Mode images
This chapter shows you how to analyze B-Mode images that are saved to a study.
In this chapter
Adding generic B-Mode measurements...........................................................................202
Adding protocol measurements........................................................................................208
Creating pressure-volume loop measurements in B-Mode...........................................210
Strain rate step 1: Adding the LV wall trace....................................................................213
Strain rate step 2: Analyzing the data...............................................................................217
Adding generic B-Mode measurements
B-Mode provides seven generic measurement tools. Use these tools when you
want to add measurements that aren't part of a measurement protocol.
Before you begin
If you want to display the measurement labels and values that you add, select the
Show Values and Labels option in the Measurement tab of the Preferences
window.
f To access the generic measurement tools for B-Mode:
 If you are acquiring B-Mode image data, press
Scan/Freeze
and then press
Measure
.
 If you are in the Study Browser, open an image and then press
Measure
.
The system displays the measurement tools at the top of the left panel.
Hover over a tool to see the description label.
Linear distance measurement
Linear distance is measured in mm.
Chapter 34