Specifications

182 VisualSonics Vevo 2100 Imaging System Operator Manual Rev 1.1
Chapter 31: Working with annotations
f To delete an annotation:
Right-click the annotation and select Delete.
f To show/hide annotations:
1. From the Study Browser (page 49) click Prefs and then click the Annotations
tab.
2. In the Annotations Display section, select or deselect the Show Annotations
check box.
f To modify the properties of an annotation:
1. Right-click the annotation and select Properties.
The Annotation Properties box appears.
2. Modify the properties as described in the following table.
Property Description
Label Annotation text. Type in new text.
Line Style Select from a plain line or three arrow-head lines.
Line Thickness Modifies the thickness of the anchor line. Select from Thin, Medium, Heavy.
Color In the drop-down box select one of 25 colors.
Font Select from the available fonts on your system.
Font Size Select a font size between 8-48 points.
Range
Specifies the range of frames in the cine loop that display the annotation. Only
available if you de-select the
Loop check box.
Loop
Applies the annotation to the entire cine loop or to a specific frame range in
the loop.
Show Anchor Line
Select or de-select the check box to show or hide the anchor line between the
annotation text and the initial caliper point.
Reset Click to return all properties to the default values.
3. Click OK.