Specifications

128 VisualSonics Vevo 2100 Imaging System Operator Manual Rev 1.1
Chapter 22: Working with studies
The mode window appears and displays the system-generated study name
and series name.
You have successfully created a study.
3. Store images to your series and then close the series.
BE CAREFUL: If you don't store images to the first and only series of a study, the
system removes both the series as well as the study when you close the series.
The Study Information window appears.
4. Complete the required fields and any optional fields as needed and click OK.
Related information
 Modifying the information properties of a study (see page 129)
Creating a study by using the New key or New button
f To create a study by using the New key:
1. From the Study Browser press
New
on your control panel or click New and
then click New Study.
2. In the New Study window:
 The name of the current operator appears in the Owner box as well as the
Acquired By box
 The Series Name defaults to Series 1
 The currently selected application appears in the Application box
 The currently selected measurement package appears in the Measurement
Package box
3. In the Study Name box type a name for the study.
4. (Optional) Customize additional property details (see page 129) in the boxes
that are labeled in gray, then click OK.
5. The system creates the study and opens the mode acquisition window in B-
Mode.
You have successfully created a study.
6. Store images to your series and then close the series.
BE CAREFUL: If you don't store images to the first and only series of a study, the
system removes both the series as well as the study when you close the series.