Specifications

Rev 1.1 VisualSonics Vevo 2100 Imaging System Operator Manual 111
Chapter 18: Setting up to acquire physiological data
Physiological Display section
Use the Physiological Display section in the left panel to activate or deactivate
the display controls for the individual physiological data inputs.
The selections you make in this section apply both when you are acquiring image
data and when you are reviewing it.
f To activate or deactivate the display controls for the individual
physiological inputs:
1. Open an image mode window by beginning to acquire data in any imaging
mode or opening any image from the Study Browser.
2. Press
Physio Settings
.
The left panel displays the physiological display setting sections.
3. In the Physiological Display section select or clear the required check boxes
as described in the following table.
Preference Check box selected Check box cleared
View Physiology
Activates all the individual data input display
controls in the section. You can only access this
check box when you have frozen your scan or
paused a cine loop review.
Dims all the available
physiological controls in the
left panel so you cannot
access them.
ECG
Displays the green ECG trace line (and numerical
data values when you stop imaging) in the
physiological trace window.
During imaging, activates the ECG waveform
slider control in the Physiological Range section in
the left panel.
Displays the ECG Trigger section in the left panel.
Hides the ECG trace line and
data.
Dims the ECG waveform
slider control.
Hides the ECG Triggering
section.
Respiration
Displays the yellow respiration trace line (and
numerical data values when you stop imaging) in
the physiological trace window.
During imaging, activates the Respiration
waveform slider control.
Hides the trace line and data.
Dims the waveform slider
control.
Invert
Flips the display of the Respiration trace line
vertically.
Flips back the display of the
Respiration trace line
vertically.
BP
Displays the red BP trace line (and numerical data
values when you stop imaging) in the
physiological trace window.
During imaging, activates the BP waveform slider
control.
Hides the trace line and data.
Dims the waveform slider
control.