Specifications

108 VisualSonics Vevo 2100 Imaging System Operator Manual Rev 1.1
Chapter 17: Setting up Mode settings presets
IMPORTANT REMINDER: When you create a custom preset, it only applies to that
specific mode in that specific application for that specific transducer.
f To create a custom Mode settings preset:
1. Begin acquiring image data in the imaging mode for which you want to create
a preset.
2. Use the control panel controls to optimize your image.
3. Press
Save Preset
.
4. In the Save Preset Settings box type the name of your preset and click OK.
The new preset appears in the Mode-specific list box below the Mode
Settings Presets list box in the Preferences window Presets tab for that
specific application and that specific transducer.
Related information
 Acquiring data in an image mode (page 120)
Modifying a custom Mode settings preset
f To modify a custom Mode settings preset:
1. Begin acquiring image data in the imaging mode for which you want to create
a preset.
2. Use the control panel controls to optimize your image.
3. Press
Save Preset
.
4. In the Save Preset Settings box:
a. In the drop-down list select the preset you want to update.
b. Click OK.
The system updates the preset with the new settings.