Repair manual

CALIBRATION & ADJUSTMENTS
5-10
Figure 5-5. Autoluminant Adjustment
6. To End Dark Current Adjust, press F1 and it defaults to AUTOLUMA.
7. Install the Photometer, turn it on, and set it to the 0-20 ft. Lamberts range.
8. Adjust the brightness to 7.5 ft. Lamberts on the Multimeter - using Luma Adjust
pots R46 (course) and R47 (fine) - Figure 5-2.
9. Using the F keys, regulate the COURSE and FINE ADJUST to change the Lumi-
nant to 6.0 ft. Lamberts on the Multimeter.
10. Adjust the VR1 pot on the Logic Board (Figure 5-5) until the Gentest Autoluminant
on the screen reads 200.
11. Press ESCAPE to return to the previous menu.