Repair manual

CALIBRATION & ADJUSTMENTS
5-2
This section includes a series of tests which should be performed whenever a Digital
Palette Film Recording system is suspected of having alignment or collimation problems.
They should also be performed following repairs which may have affected alignment or
collimation.
Important
As you service this product for alignment and collimation problems, make sure that you
follow the procedures (A through H) in sequence. However, please note that procedures
D, E, G, and H should be done only at DEPOT level facilities.
Before Proceeding
Always refer to the latest Digital Palette Film Recorder specification list for current test
parameters.
Also, be sure to allow a 15 minute warm-up time before performing any of these tests.
WARNING:
Many of these tests must be performed with power ON.
Use extreme caution to avoid electrical shock.