Repair manual

PARTS REPLACEMENT
4-6
A. REPLACING THE FRONT HOUSING ASSEMBLY
1. REMOVAL: (Figure 4-2)
a. Disconnect AC power from the system.
b. Remove the six screws and washers holding the Cover to the bottom
of the chassis. Slide the Cover to the rear and lift it off.
c. Pull the LED indicator and cable out of its retainer by grasping the
cable with pliers and using the chassis edge as a fulcrum (see
Figure 4-2 )
d. Remove the four screws holding the Front Housing Assembly to the
chassis, then remove the Front Housing.
2. INSTALLATION
Perform steps a.- d. above in reverse order.