Repair manual

PARTS REPLACEMENT
4-5
SPECIAL EQUIPMENT REQUIRED
Presented below is a list of equipment needed for the required calibration and adjustment of the
Digital Palette, when the following parts are replaced: CRT, CRT Mounting Fixture, Stepper
Motor, Monitor Board Assembly, or Logic Board Assembly.
Digital Palette Gentest Diskette
Host Computer
Video Photometer
Oscilloscope
K42769 Edmonds Scientific 6X Loupe
12979 Final Assembly Alignment Gauge
12991 CRT Collimation Master
12992 CRT Collimator
1-150 Light Source
C-1300 Null Meter
12993 Camera Back Collimator
12988 35mm Collimation Adapter
12996 35mm Fiber Optics Locator Assembly
12995 35mm Adapter Collimation Master
12974 35mm Lens Adjust Wrench
12994 108 Adapter Collimation Master
12974 108 Lens Adjust Wrench