MS 4150 RS MP3

Notes on operating instructions
The following reading aids are used to simplify these operating instructions:
☞
requests you to perform an action.
:
shows the unit’s reaction.
✎
provides additional information
–
identifies a list.
A
Safety instructions and warnings contain important information for the safe use of the
unit. Failure to observe this information may result in a risk of damage or injury. Therefore,
please observe this information with particular care.
Class 1 laser product
CAUTION: Any inappropriate use of the device may
expose the user to invisible laser rays which exceed
the limits for Class 1 laser products.
Theft protection
The system has the following safety functions to prevent theft:
Security code
The navigation radio can be protected against theft with a security code. The unit is
disabled as soon as it is disconnected from the voltage supply (e.g. if it is stolen). It can
only be reactivated by entering the security correct code.
The security code can be activated/deactivated and changed. For further information
see “INITIALISATION”, option “Security Code” ➽ page 38.
Anti-theft protection LED
When the navigation radio is switched off and the and the ignition key removed, the
red anti-theft protection LED above the POWER/VOLUME knob flashes.
The anti-theft LED is linked to the security code. It will not flash if the security code
has been deactivated.
Safety sticker
☞
Affix the safety stickers provided to the vehicle windows so that they are clearly visible.
GENERAL INFORMATION
9
English
CLASS 1
LASER PRODUCT