MS 4150 RS MP3

Optional connections ISO chamber C, Fig. 4 - 6
■
Line-out (yellow connector C1):
(adapter cable, accessories)
An amplifier with additional loudspeakers can be connected to the unit via this
connector.
■
Telephone input (green connector C2):
(adapter cable, accessories)
☞
Connect the loudspeaker output of your mobile phone or hands-free unit to lead C2.
✎
For information about setting the telephone attributes, refer to “INITIALISATION”
in the operating instructions.
■
TMC receiver (connector C2):
(adapter cable, accessories)
You can connect an MT 5011 dynamic TMC receiver to the unit.
For installation and connection details, refer to the TMC receiver installation
instructions.
Following connection, the TMC receiver must be registered with the navigation radio
in order to specify it as the TMC source for the navigation system.
☞
Activate the “Ext. TMC Receiver” in the “Settings –> TMC source” menu, in
order to use the TMC receiver as the source for traffic announcements.
✎
The new setting is only active after re-starting the system.
■ Steering wheel remote control (connector C2):
(adapter cable, accessories)
In some vehicles, many radio functions can be controlled using the vehicle-specific
steering wheel remote control. In order for this to be possible, the steering wheel
remote control must be connected to the radio using an adapter cable. Ask your
dealer for the appropriate adapter cable.
■
CD changer (blue connector C3):
You can connect a digital CD changer to the unit. Please contact the service
department or your dealer for information on suitable CD changers.
For connection details, refer to the CD changer installation instructions.
Installing the GPS antenna, Fig. 7
The GPS antenna may be installed in the passenger compartment, for example on the
dashboard or the rear shelf. The antenna needs to have unrestricted “visual contact”
to the sky.
☞
Clean the mounting surface and attach the antenna with the double-sided adhesive
strip.
✎
Vehicles with metallised windows should have the antenna installed on the boot
lid, on the roof or in the plastic bumper.
Note: To guarantee the functioning of the antenna, maintain a minimum distance of
10 cm to any metal parts (window frame, etc.) during installation.
INSTALLATION INSTRUCTIONS
18