Specifications

CYTEC's CY/64DRV VXI C-Size Driver Module is built with 64 individually address-
able current sourcing or sinking drives and is designed to power external loads
such as relays or solenoids. The CY/32KCP has 32 Form C Power Relays that can
switch up to 8 A of current and 150 watts DC or 2000 watts AC.
This module has 64 individually controlled drives and is built
with either current sourcing or sinking ICs. These modules
are typically used to drive solenoids or relays located exter-
nal to the VXI Module. Each drive channel is an open col-
lector and has integral diode suppression. The drives can
be wired to the VXI Chassis' internal power supply busses or
to an external source.
The CY/64DRV is configured via an internal DIP Switch to
furnish one of eight different operational modes, supplying
either 64 randomly controllable drives, one of four different
multiplexing modes or one of three different group switch
types. The use of any mode is determined by the switching
application. Drive status (on/off) can be verified by the con-
trolling computer at any time.
BULLETIN
CY/DRV
2555 Baird Road, Penfield, New York 14526 [phone] FAX [phone]
CY/64DRV RELAY/SOLENOID DRIVER MODULE
CY/32KCP FORM C POWER SWITCH MODULE
• CY/64DRV-SNK 64 Channel Current Sinking Driver
• CY/64DRV-SRC 64 Channel Current Sourcing Driver
• Internal 14 Pin Headers - wired out to external loads
This module is built with 32 individually controllable Form C
Armature type Power Relays. The Normally Open, Normally
Closed and Common contacts of each relay are individually
wired out to three separate pins on a "D" style connector as
shown below. Any number of relays may be closed simulta-
neously, and the status of all relays may be read at any time
by the controlling computer.
• CY/32KCP- 32 Form C Power Relays Switch Module
• Four 25 Pin D subs
CY/32KCP SPECIFICATIONS
Power +5 V, 1.2 Amp. Max.
+12 V, 25 mA per ener. relay
TYPE P RELAY RATINGS
Switching Power 2000VA, 150W
Switching Voltage 380VAC
Switching Current 8 Amp.
Breakdown Voltage 1200 VRMS
Operate Time 10 mSec. Max.
Mechanical Life 10
7
Operations
Control Power +5 Volts, 2.1 A Max.
+12 Volts, 0.2A Max.
(not including relay driver)
Drive Power Source Sink
Max. Voltage 80 VDC 50 VDC
Max. Current per Driver 350 mA 400 mA
Max. Current per IC Package 1 Amp 1 Amp
25 Pin D sub Connector
CY/64 DRV C-SIZE DRIVER MODULE
AVAILABLE MODELS
CONNECTORS
CY/64DRV SPECIFICATIONS
Member of the VXI Plug and Play Alliance..
FOR TECHNICAL ASSISTANCE CONTACT 1-800-346-3117 or WWW.CYTEC-ATE.COM
WARRANTY
CYTEC Corp. warrants that all products are free from de-
fects in workmanship and materials for a period of 5 years.
CY/32KCP POWER SWITCH MODULE
AVAILABLE MODELS
CONNECTORS