Specifications
CY SERIES RELAY SPECIFICATIONS
CY/128 - These are built with 64 two-pole reed relays. Internal
Pin Jumpers permit a variety of user-defined configurations,
ranging from eight individual 8x1 two-pole multiplexers to one
128x1 single pole mux.
CY/8x8 - This 8 Input/8 Output Matrix Switch Module is avail-
able with either single or two pole reed relays.
CY/16x8 - This is a 16 Input/8 Output Matrix that is built with
Type A armature relays and is used for switching instrumenta-
tion level signals.
CY/64x2 - This holds 128 single pole reed relays arranged as
eight individual 8x2 matrices. Many other configurations are
possible, including the "standard" 64x2.
CY/64K - This provides 64 individual Form A (NO) Reed Re-
lays.
CY/64KC - This supplies 64 separate Form C (NO/COM/NC)
Type A Instrumentation Armature Relays.
CY/32KCP - This is built with 32 Individual Form C Type P
Power Relays for high power/current applications.
CY/CX - This is a 50 ohm impedance 8x8 matrix which is de-
signed to switch RF signals. Bandpass (-3dB) is 200 MHz.
CY/G and CY/M - These switch microwave signals (DC-18
GHz). These one, two or three slots modules are built to the
user's specifications and hold the CXR/1G and CXM Series
Switch Modules.
CY/48x48 - This 48x48 single pole matrix designed to switch
±5 volt signals. Bandpass is DC to 1 MHz, and path on resis-
tance is 60 ohms.
CY/16x16ECL - This provides a 16x16 nonblocking matrix for
switching Differential ECL up to 1.2GBPS.
CY/IO-48 - This holds 48 unity gain impedance matching buffer
amplifiers.
CY/INST-48 - This holds 48 precision differential input op amps.
These have high input and low output impedances and make
an ideal buffer into the CY/48x48 Solid State VXI Matrix.
•
•
•
•
•
•
•
•
•
CY SERIES MODEL OVERVIEW
•
•
•
•
• Type S - Standard Dry Reed Relays.
• Type M - Mercury Wetted Reed Relays.
• Type LT - Low Thermal Reed Relays.
• Type P - Armature Power Relays.
• Type A - Instrumentation Level Signal Armature Relays.
Relays have the following guaranteed lifetimes when operated
within the specified operating parameters.
Solid State Modules
CYTEC currently offers the following Models/Configurations:
Relay Modules (Note: All Relay Modules are bidirectional.)
MICROWAVE RELAYS
These CY/G and CY/M Modules are available as indi-
vidual relays or as multiplexers or wired in a variety of
different configurations including matrices. Please con-
tact our Sales Department for information.
Relay Type S M LT P A
Min. Life - Mechanical 10
8
10
8
10
8
10
7
10
8
Min. Life - Full Load* 10
8
10
8
10
8
2x10
5
2x10
5
Contact Rating VA 10 50 10 2000 30
Switch Voltage 200V 500V 100V 380V 110V
Max. Switch Current 0.5A 2.0A 0.2A 8A 1.0A
Max. Carry Current 1.0A 2.0A 1.0A 10A 1.0A
Breakdown Voltage 400V 1000V 200V 1000V 750V
Operate Time <1ms <2ms <1ms <15ms <3ms
DC Isolation - Ohms 10
11
10
11
10
12
10
9
10
9
*Load is purely resistive
AD DATA SWITCH MODULES
CYTEC Corp is offering support, repair, service
and replacement of AD Data VXI Modules.
230114-111 - Single pole, Standard Reed Relays. 64
SPST Switches; 64 Discrete Switches, 0.5 amp.
230114-112 - Single pole, Mercury Relays, 64 SPST
Switches; 64 Discrete Switches, 2.0 amp.
230115-111 - Single pole, Standard Reed Relays, 64x1
Multiplexer Switch 0.5 amp.
230115-112 - Single pole, Mercury Relays, 64x1 Multi-
plexer Switch 2.0 amp.
230115-121 - Double pole, Standard Reed Relays, 64x1
Multiplexer Switch 0.5 amp.
230115-122 - Double pole, Mercury Relays, 64x1 Multi-
plexer Switch 2.0 amp.
230115-123 - Double pole, Low Thermal Relays, 64x1
Multiplexer Switch.
230116-111 - Single pole, Standard Reed Relays, 16x4
Matrix Switch 0.5 amp.
230116-112 - Single pole, Mercury Relays, 16x4 Matrix
Switch 2.0 amp.
230116-121 - Double pole, Standard Reed Relays, 16x4
Matrix Switch 0.5 amp.
230116-122 - Double pole, Mercury Relays, 16x4 Matrix
Switch 2.0 amp.
230126-123 - Double pole, Low Thermal Relays, 16x4
Matrix Switch 0.5 amp.
230117-111 - Single pole, Standard Reed Relays, Regis-
tered based 96 (1x1) Switch Module 0.5 amp.
230117-112 - Single pole, Mercury Relays, Registered
based 96 (1x1) Switch Module 2.0 amp.
230118-111 - Single pole, Standard Reed Relays, Regis-
tered based 24 (4x1x1) Switch Module 0.5 amp.
230118-112 - Single pole, Mercury Relays, Registered
based 24 (4x1x1) Switch Module 2.0 amp.
230119-111 - Single pole, Standard Reed Relays, 6 (1x4)
Coaxial 1 Gigahertz Switch Module.
230120-115 - Single pole, Armature Relays, 20 SPST
10 amp, Register-based Power Switch Module.
230120-125 - Double pole, Armature Relays, 20 SPST
or 10 DPST 10 amp, Register-based Power Switch Mod-
ule.
230122-111 - Single pole, Standard Reed Relays, Regis-
tered based 12 (4x1) and 48(1x1) Switch Module 0.5 amp.
230122-112 - Single pole, Mercury Relays, Registered
based ARINC 608A 2 (4x1x1) and 48(1x1) Form A 2A
Switch Module.
230131-123 - Double pole, Low Thermal Relays, Regis-
tered based ARINC 608A Form A Resource Distributor
Switch Module.
230132-123 - Double pole, Low Thermal Relays, Regis-
tered based ARINC 608A 2 (16x4) 4 wire/channel Form
A Bus Matrix Input Switch Module.