Specifications

ManualsBrandsVDO CYTEC ManualsBicycle AccessoriesC 10

RSM MARSM MA

RSM MA

TRICESTRICES

TRICES

RSM Matrices are designed to switch multiwire data communications signals such as RS232, RS422 and

Token Ring. RSM Systems can switch 9, 15 or 25 wires and are available with D9, D15 or D25 style

connectors.

MAINFRAMESMAINFRAMES

MAINFRAMES

SWITSWIT

SWIT

CH MODULESCH MODULES

CH MODULES

Mainframes are 19" rack mounted chassis, 7" (4U) high

and 21" deep, with power supplies and pre-wired moth-

erboards that hold Switch Modules, LED Display Mod-

ules and Control Modules.

RSM/16x8 SERIESRSM/16x8 SERIES

RSM/16x8 SERIES

These Mainframes hold up to 16 of the RSM/1x8 Switch Mod-

ules assembled in a 16x8 configuration.

Bandpass is DC to 40 MHz (-3dB).

RSM/16x8-15 chassis accepts the RSM/1x8-15 Modules and

switches 15 wires on D15 connectors.

RSM/2(16x4) SERIESRSM/2(16x4) SERIES

RSM/2(16x4) SERIES

These Mainframes are built with up to 16 of the RSM/2(1x4)

Switch Modules assembled in a 32x4 configuration.

Bandpass is DC to 30 MHz (-3dB).

RSM/32x4-25 chassis accepts the RSM/2(1x4)-25 Modules,

switching up to 25 wires to D25 connectors.

RSM/32x4-15 chassis holds the RSM/2(1x4)-15 Modules and

switches up to 15 wires from D15 connectors.

RSM/32x4-9 is built with the RSM/2(1x4)-9 Modules, switch-

ing up to 9 wires on D9 connectors.

RSM/16x8-9 chassis holds the RSM/1x8-9 Modules, switch-

ing 9 wires to D9 connectors.

RSM/16x8-25 chassis holds the RSM/1x8-25 Modules, switch-

ing 25 wires from D25 connectors.

RSM/32x4 SERIESRSM/32x4 SERIES

RSM/32x4 SERIES

RSM/2(16x4)-25 chassis accepts the RSM/2(1x4)-25 Mod-

ules, switching up to 25 wires with D25 connectors.

RSM/2(16x4)-15 chassis is built the RSM/2(1x4)-15 Modules

switching up to 15 wires to D15 connectors.

RSM/2(16x4)-9 chassis holds the RSM/2(1x4)-9 Modules

switching, up to 9 wires to D9 connectors.

These Mainframes hold up to 16 of the RSM/2(1x4) Switch

Modules assembled as a dual 16x4 configuration.

Bandpass is DC to 40 MHz (-3dB).

The RSM Switch Modules are built as either a single 1x8

matrix, or as a dual 1x4 matrix configuration. They are

bidirectional and switch 9, 15 or 25 wires to D9, D15 or

D25 connectors. Switching is done with high reliability,

passive Type A Relays.

RSM/1X8 SWITRSM/1X8 SWIT

RSM/1X8 SWIT

CH MODULESCH MODULES

CH MODULES

These utilize a 1x8 configuration as shown in Fig. 3.

RSM/1x8-25 switches 25 wires from D25 connectors and are

used with the RSM/16x8-25 Chassis

RSM/1x8-15 switches 15 wires using D15 connects and are

assembled in the RSM/16x8-15 Chassis.

RSM/1x8-9 switches 9 wires using D9 connectors and plug

into the RSM/16x8-9 Chassis.

RSM/2(1X4) SWITRSM/2(1X4) SWIT

RSM/2(1X4) SWIT

CH MODULESCH MODULES

CH MODULES

These modules are built as a dual 1x4 configuration as shown

in Fig. 4 :

RSM/2(1x4)-25 switches 25 wires using D25 connectors in

either the RSM/32x4 or RSM/2(16x4) Chassis.

RSM/2(1x4)-15 switches 15 wires from D15 connectors and

are used in the RSM/32x4 or RSM/2(16x4) Chassis.

RSM/2(1x4)-9 switches 9 wires using D9 connectors in the

RSM/32x4 or RSM/2(16x4) Chassis.

9 to 25 wires

D-type connector

Motherboard

9 to 25 wires

D-type connectors

Motherboard

Fig. 3

Fig. 4

RS-3

EXPEXP

EXP

ANSION CHASSISANSION CHASSIS

ANSION CHASSIS

Expansion Chassis are built similar to the Mainframes

except they are not built with control modules. They

are controlled from a MESA Chassis as described in the

MESA Bulletin.