Specifications
CONTROLS
RJA, RJM, RJX/128 CONTROL MODULES
IF-1 PARALLEL PORT
IF-3 RS232 SERIAL
IF-4 IEEE488 BUS TALK/LISTEN
IF-5 IEEE488/RS232
M/128 MANUAL CONTROLS
RJX/32 MAINFRAME CONTROLS
IF-3B RS232 SERIAL
IF-4B IEEE488 BUS TALK/LISTEN
M/32 MANUAL CONTROLS
RJV AND RJB SERIES CONTROLS
IF-3C RS232 SERIAL
IF-4C IEEE488 GPIB
CONTACT 1-800-346-3117or WWW.CYTEC-ATE.COM FOR TECHNICAL ASSISTANCE
MC/2 MANUAL CONTROL - RJV ONLY
SWITCH SPECIFICATIONS
SPECIFICATION TYPE S TYPE M TYPE A
Contact Rating VA 10 50 30
Switching Voltage DC 200V 500V 110V
Switching Current DC .5A 1.0A 1.0 A
Carrying Current DC 1.0A 2.0A 1.0A
Breakdown Voltage DC 400V 1000V 750V
Operate Time msec 1 2 3
IF-7B COMBINED USB/RS232
IF-7C COMBINED USB/RS232
IF-7 COMBINED USB/RS232
This requires 14 individual binary, TTL level lines from the con-
trolling computer. These select Switch and Mode, Strobe the
selected command and return switch point Status.
This module has all the RS232 features detailed in Applica-
tions Bulletin AP-5.
This module has all the IEEE488 BUS features detailed in Ap-
plications Bulletin AP-5.
This module combines both the IEEE488 BUS and RS232 fea-
tures detailed in Applications Bulletin AP-5.
This control module is plug-and-play compatible with Universal
Serial Bus and furnishes dual controls via both RS232 and USB,
allowing users to switch to USB control as COM ports become
obsolete on new computers.
Thumbwheels and switches on the front panel select and con-
trol up to 128 relays.
This Control Module has all the RS232 features detailed in Ap-
plications Bulletin AP-5.
This module has all the IEEE488 BUS features detailed in Ap-
plications Bulletin AP-5.
Thumbwheels and switches on the front panel select and con-
trol all relays.
This module has all the RS232 features detailed in Applica-
tions Bulletin AP-5.
This module has all the IEEE488 BUS features detailed in Ap-
plications Bulletin AP-5.
IF-6 LAN INTERFACE
This module allows control via a Local Area Network using TCP/
IP protocols detailed in the AP-5 Bulletin.
IF-6 LAN INTERFACE
This module allows control via a Local Area Network using TCP/
IP protocols detailed in the AP-5 Bulletin.
This module allows control via a Local Area Network using TCP/
IP protocols detailed in the AP-5 Bulletin.
IF-6 LAN INTERFACE
GENERAL SPECIFICATIONS
WEIGHT - Weight is dependent on chassis type and the num-
ber of modules. Please contact CYTEC for specific details.
POWER - 100 watts at 100-130 Volts AC or 200-260 Volts AC.
ENVIRONMENT - Operating 0
0
C to 50
0
C
Storage -25
0
C to 65
0
C
The RJM Matrices and RJV Multiplexers are built with high
sensitivity Type A Armature relays. The RJB is a solid state
(only) matrix. All other units are supplied with Type S Stan-
dard Dry Reed Relays. The RJA Matrices can optionally be
built with Type M Mercury Wetted Reed Relays in the 2 and
4 pole versions only.
This control module is plug-and-play compatible with Universal
Serial Bus and furnishes dual controls via both RS232 and USB,
allowing users to switch to USB control as COM ports become
obsolete on new computers.
This control module is plug-and-play compatible with Universal
Serial Bus and furnishes dual controls via both RS232 and USB,
allowing users to switch to USB control as COM ports become
obsolete on new computers.
PALM PC MANUAL CONTROL
This is currently available for use with the IF-4 IEEE488 Control
Module. Application Programs running on the Palm PC display
a virtual keypad manual control. It may be purchased with or
without the Palm PC itself.
This Virtual Manual Control Software enables a remote opera-
tor to view the Status of the Matrix and to Control Switch Selec-
tion using a full Graphical User Interface.
VMCS
This Manual Control Option has a Keypad and LCD Display on
the front panel so that the operator can select any relay and
verify that the relay has been selected via the display. It is only
available for the RJV Series.
ADDITIONAL MANUAL CONTROL OPTIONS
The following Manual Control Options are available for ALL
chassis mentioned in this Bulletin. Contact our Technical
Sales Representatives for more details and information.
The RJ Series Mainframes are computer controlled via: IEEE488 BUS, RS232 Serial, Ethernet LAN, Uni-
versal Serial Bus (USB) or TTL Parallel Port. The Control Module selects any Mainframe switch point and
is able to Latch, Unlatch and Request Status of the switch in both Matrix and Multiplex Modes.
In the Matrix Mode, any number of switches can be closed at the same time. In the Multiplex Mode, only
one switch can be closed at a time.
RJ-6