Specifications

ManualsBrandsVDO CYTEC ManualsBicycle AccessoriesC 10

LX SERIES SWITLX SERIES SWIT

LX SERIES SWIT

CH SPECIFICACH SPECIFICA

CH SPECIFICA

TIONSTIONS

TIONS

VERALL SPECIFICAVERALL SPECIFICA

VERALL SPECIFICA

TIONSTIONS

TIONS

WARRANTYWARRANTY

WARRANTY

LX-4

LX CONTROL MODULESLX CONTROL MODULES

LX CONTROL MODULES

MANUAL CONTROLSMANUAL CONTROLS

MANUAL CONTROLS

MC/128-MC/128-

MC/128-

TW MANUTW MANU

TW MANU

AL CONTROLSAL CONTROLS

AL CONTROLS

VMCS VIRTUAL MANUAL CONTROL SOFTWAREVMCS VIRTUAL MANUAL CONTROL SOFTWARE

VMCS VIRTUAL MANUAL CONTROL SOFTWARE

CYTEC Corp. warrants that all products are free from defects in

Material or Workmanship for a period of 5 years, and that all

switches are guaranteed for their Rated Operations.

DIMENSIONS - Standard Mainframes are 19 inch Rack Mount-

ing, 3.5 inches high and 15.6 inches deep. Wired Mainframes

are 15.6 inches deep.

WEIGHT - Maximum weight,with a full complement of Mod-

ules, is less than 25 lbs.

POWER - 100 watts at 100-130 Volts AC or 200-260 Volts AC.

ENVIRONMENT - Operating 0

C to 50

C @95% Relative

Humidity

Storage -25

C to 65

C @95% Relative

Humidity

These Switch Modules are built with several different relay

types, as determined by the switched signals.

Type S Standard reed relay is used for general purpose instru-

mentation level signals.

Type M Mercury reed relay switches higher power signals.

Type LT Low Thermal reed relay has a thermal offset of less

than 1 microvolt and is used for for very low level signal appli-

cations.

Type HV High Voltage reed relay is rated at 1500 volts break-

down voltage.

Type P High Power armature relay has an AC rating of 2000

VA and can switch up to 8 amps.

Type S, Type M, Type LT, and Type HV are all high reliability

reed relays with a guaranteed life of 100 million operations when

used within the following specifications. Type P relays are ar-

mature type and have a mechanical life of 10 million cycles.

GX GROUP SWITCHGX GROUP SWITCH

GX GROUP SWITCH

LX8/G2 Switch Modules can be used in either the GX/8

or GX/16 Group Switch Chassis to switch signals in groups

of 16 wires in up to a 16x1 Multiplexer configuration. For

more information see the GX Bulletin.

CONTCONT

CONT

CT 1-800-346-3117 OR WWWCT 1-800-346-3117 OR WWW

CT 1-800-346-3117 OR WWW

.CYTEC.CYTEC

.CYTEC

TETE

.COM FOR TECHNICAL ASSIST.COM FOR TECHNICAL ASSIST

.COM FOR TECHNICAL ASSIST

ANCEANCE

ANCE

ALM PC MANUALM PC MANU

ALM PC MANU

AL CONTROLAL CONTROL

AL CONTROL

This Software displays a full Graphical User Interface (GUI) on

the controlling computer. The operator controls the Mainframe

with simple mouse point-and-click operations. The software

can also be used to control the unit over a LAN.

A demo version is available on our web site at:

http://www.cytec-ate.com/soft.htm

ACCESSORIESACCESSORIES

ACCESSORIES

Front panel thumbwheels and push button Manual Controls

select and control all Mainframe Switchpoints. This manual

control can be "locked out" by the computer.

IFIF

-1 P-1 P

-1 P

ARALLEL PORTARALLEL PORT

ARALLEL PORT

The LX Mainframes can be computer controlled via the

modules listed below. Each Control Module selects any

Switchpoint and Latches, Unlatches and returns Status

of that point.

This is currently available for use with the IF-5 IEEE488/RS232

Control Module. Application Programs running on the Palm

PC display a virtual keypad manual control.

CHASSIS SLIDESCHASSIS SLIDES

CHASSIS SLIDES

SOFTWARESOFTWARE

SOFTWARE

Drivers and Sample Programs are available for the most com-

mon programming languages. These check the entire system

by cycling through all switches, sequentially latching and un-

latching each switch while checking Status.

This module requires 14 individual TTL level binary lines from

the controlling computer. These select Switch and Mode, Strobe

the selected command and return SwitchPoint Status.

This module combines both the IEEE488 Talk/Listen and the

RS232 features detailed in the AP-5 Bulletin.

IFIF

-6 LAN INTERF-6 LAN INTERF

-6 LAN INTERF

CECE

This module allows control via a 10Base-T Ethernet LAN using

TCP/IP protocol detailed in the AP-5 Bulletin.

IFIF

-7 COMBINED USB/RS232-7 COMBINED USB/RS232

-7 COMBINED USB/RS232

This module furnishes computer control via either RS232 or

Universal Serial Bus. It allows users to switch to USB control

as COM ports are obsoleted on new computers.

MAMA

TING CONNECTTING CONNECT

TING CONNECT

ORSORS

ORS

J3 Three Pin Header Connector

J10 Ten Pin Card Edge Connector

J20 Twenty Pin Card Edge Connector

J20R Twenty Pin Ribbon Connector

J20C Twenty Crimp Pin Connector

CHS-1 Chassis Slides with 15 inches travel

SPECIFICATIONS S M LT HV P

Contact Rating VA 10 50 10 10 150

Switching Voltage 200 500 200 1000 500

Switching Current .05VA 1.0A .05A 0.1A 8A

Carrying Current 1.0A 2.0A 1.5A 1.0A 10A

Breakdown Voltage 400 1000 400 1500 1400

Operate Time msec 1 2 1 1 10

Rated Operations 10

CABLESCABLES

CABLES

CBL-0.5 IEEE488 Cable .5 Meters long

CBL-1 IEEE488 Cable 1 Meter long

CBL-2 IEEE488 Cable 2 Meters long

RS-1 RS232 Cable 1 Meter long

PC-2 PC Interface Cable 2 Meters long

IFIF

-5 IEEE488/RS232-5 IEEE488/RS232

-5 IEEE488/RS232