Specifications

ManualsBrandsVDO CYTEC ManualsBicycle AccessoriesC 10

HXV/32 Mainframe (rear panel)

HXV CHASSISHXV CHASSIS

HXV CHASSIS

HXV/32 MAINFRAMESHXV/32 MAINFRAMES

HXV/32 MAINFRAMES

HXV/96-E and HXV/128-E EXPHXV/96-E and HXV/128-E EXP

HXV/96-E and HXV/128-E EXP

ANSION CHASSISANSION CHASSIS

ANSION CHASSIS

HXV SERIES SWITCH MODULESHXV SERIES SWITCH MODULES

HXV SERIES SWITCH MODULES

HXV/8x1-A or -BHXV/8x1-A or -B

HXV/8x1-A or -B

This switch module has eight Form A (Normally Open) or Form

B (Normally Closed) relays arranged in an 8x1 configuration

as shown in Fig. 1. A screw terminal connector is built into

the module so that the COM connections may be wired to-

gether inside the chassis to form larger multiplexers.

Fig. 1

HXV/4x2-AHXV/4x2-A

HXV/4x2-A

This switch module is built with eight Form A (SPST) relays

arranged in a 4x2 matrix configuration as shown in Fig. 2.

Built-in screw terminal connectors allow the two COM con-

nections to be wired together among multiple modules within

the chassis to form larger matrices such as 8x2, 16x2, etc.

Fig. 2

123

COM

0123C0C1

The HXV Chassis are 19" rack mounting chassis that are pre-wired to hold the HXV Series of Switch

Modules. Mainframe chassis include built-in power supplies. The Switch Modules mount so that the

signal I/O connectors protrude through the chassis' rear panel. Power and control connectors are also

mounted on the rear panel. The front panel has LEDs that show power ON and switch status. Optional

manual controls also mount on the front panel. The following units are available:

This Chassis controls 32 switch points. A number of different

switching configurations are possible. Add the required Switch

Module(s) and a Control Module to complete the system. Stan-

dard Chassis depth is 15.6", and Chassis height 5.25". Note

that the HXV/32 is not available as an expansion chassis.

HXV/96 and HXV/128 MAINFRAMESHXV/96 and HXV/128 MAINFRAMES

HXV/96 and HXV/128 MAINFRAMES

These Chassis control 96 or 128 switch points respectively. A

variety of configurations are possible. CL8 Display/Driver Mod-

ules drive the associated Switch Modules and provide LED

indication of switch status. Add Switch Modules, CL8s and a

Control Module to complete the system. Standard Chassis

depth is 15.6". The HXV/96 is 7" high, while the HXV/128 is

10.5" high. Purchasing larger Mainframes only partially filled

allows for cost-effective future expansion.

HXV/96 and HXV/128 units are also built as expansion chas-

sis for use with a MESA Control Chassis shown in the MESA

Bulletin. Multiple expansion chassis allow the configuration

of large or complex systems having one point of control, which

results in cost savings. Expansion Chassis do not include

power supplies or control modules. Add the required switch

modules and CL8 Display/Driver Modules as needed to com-

plete the system.

The HXV Series of Switch Modules are built with special High Voltage Reed Relays that switch up to

3500 Volts and carry 5000 Volts. Applications include HiPot testing, insulation breakdown testing and

other extreme voltage requirements. External signal connectors are either SHV coaxial or Banana Plugs.

The modules can be wired together internally to furnish larger configurations while eliminating external

connections. For example, chassis can be supplied pre-wired as 32x1, 96x1 or 128x1 multiplexers, or ,

16x2, 48x2 or 64x2 matrices.

HXV/8-KA or -KBHXV/8-KA or -KB

HXV/8-KA or -KB

This module has eight individual Form A (Normally Open) or

Form B (Normally Closed) relays wired out to 16 connectors

as shown in Fig. 3. It requires a double slot in the chassis.

Fig. 3

0123

4567

HXV-1

HXV/8x1-A Switch Module

CYTEC Corp. takes pride in building custom sys-

tems that meet non-standard or special customer

specifications. Please call 1-800-346-3117 or email

sales@cytec-ate.com to contact an Application En-

gineer and discuss details.

HXV/8-KA Switch Module

CUSTOM SYSTEMSCUSTOM SYSTEMS

CUSTOM SYSTEMS