Specifications
CYTEC Corp., supplier of the most comprehensive range of Programmable Switch-
ing Systems, continues to expand its product line by offering the following New
Products for automated test, data acquisition or communications:
CONTACT 1-800-346-3117, SALES@CYTEC-ATE.COM OR WWW.CYTEC-ATE.COM
FOR TECHNICAL ASSISTANCE AND A COMPLETE CATALOG WITH PRICING!
October 2005
2555 Baird Road, Penfield, New York 14526 (585) 381-4740 FAX (585) 381-0475
NEW PRODUCT NEWSNEW PRODUCT NEWS
NEW PRODUCT NEWSNEW PRODUCT NEWS
NEW PRODUCT NEWS
MOST Bus / Toslink Fiber Optic FX/1x8-TL Switch Modules
This opto-electrical-opto module switches Transmit and Receive pairs in an 8x1 or 1x8 con-
figuration. Module can be configured for a variety of applications such as audio, MOST bus, or
serial data communications. Modules can be used in FO Series 16, 32 or 128 channel driver
chassis. Call or e-mail for application assistance, pricing and availability.
Low Leakage Module
CXR/2(4x1)-LL-BNC or -Triax for low current or high resistance measurements
Dual 4x1 low leakage modules can be used to measure currents down
to femtoamps (10E-15 amps), or resistances up to teraohms (10E+12).
Modules have jumpering options to allow outer conductor isolated or use
as a driven guard. BNC or Triax connectors. Fits in Cytec CXAR Series
16, 32, or 128 channel driver chassis. Module can be wired to form 1x8
or 4x2 configurations. Bus bars available to form larger matrices. Call
or e-mail for details about your specific needs.
Microwave systems now go up to 40 GHz
Cytec can now build our CXM Series of microwave switching systems using re-
lays with a frequency range of DC to 40 GHz.
Call for Price and availability. Custom Microwave and RF systems built to your
requirements.
Low Cost Blocking, Nx4 DC to 1 GHz RF or Video Matrix
New CXL/8x4 Switch Module allows for low cost configuration of 8x4, 16x4 or 32x4 matrices with bandpass of 1 GHz in 8x4 (-3dB) and up
to 650 MHz (-3 dB) for 50 ohm 32x4 systems. Blocking architecture means that you can connect any input to any output but previously
connected paths may need to be interrupted momentarily while the switch is reconfigured. If you can tolerate this interruption that only
occurs during configuration this switch can save you as much as 50% off the price of non-blocking systems with similar specs and take up
half the rack space. Call 1-800-346-3117 for configuration specific pricing.
Price Lowered on Solid State Analog and Digital Matrices!!!
Cytec has lowered the prices on our large solid state digital and analog matrices by as much as
50%. Prices have been lowered on:
TX Series of modular analog matrices -- DC to 140 MHz (small signal 50 and 75 ohm) up to
256x256 configuration.
DX/64x64 high speed differential signal matrices -- RS422, ECL, PECL, LVDS, and CML up to
1.3 Gbps.
DX/256x256 TTL and RS422 matrices -- signals up to 40 Mbps. Check the web for our latest
prices! Fill out a catalog request form to receive the price list in PDF.
www.cytec-ate.com
P0 P1 P2 P3 A COM B COM P4 P5 P6 P7