Specifications

This manual control has a keypad and LCD display of last
command.
CX SERIES
COAXIAL AND RF
SWITCHING MATRIX
The CX Series of Switching Matrices are available in a variety of single wire coax configu-
rations designed to operate in the range from DC to 700 MHz with many options to mini-
mize price while meeting the desired specifications.
CXG/8x8 50 ohm Mainframe
CX MAINFRAMES AND EXPANSION CHASSIS
BULLETIN
CX/8
2555 Baird Road, Penfield, New York 14526 [phone] FAX [phone]
CXB MAINFRAMES -- DC to 50 MHz
CX-1
Modular Systems with BNC connectors available in incre-
mental nonblocking configurations from 1x8 to 16x8, or from
2x4 to 32x4. 19" rackmount chassis, 3.5" high. See page
CX-2 of bulletin for complete specifications.
CXE MAINFRAMES -- DC to 50 MHz
Modular Systems with BNC connectors available in incre-
mental nonblocking configurations from 2x8 to 32x8. 19"
rackmount chassis, 3.5" high. See page CX-2 of bulletin for
complete specifications.
CXG MAINFRAMES -- DC to 700 MHz
Available as 4x8 or 8x8 nonblocking matrices in 50 or 75
ohm characteristic impedance. Available with BNC, SMA or
user specified connectors. 19" rackmount chassis, 7" high.
See page CX-3 of bulletin for complete specifications.
CXF MAINFRAMES -- 10 MHz to 500 MHz
Available as 4x8 or 8x8 nonblocking, full fan-out matrices
with 50 ohm characteristic impedance. Available with BNC,
or SMA connectors. 19" rackmount chassis, 7" high. See
page CX-3 of bulletin for complete specifications.
CXL MAINFRAMES -- DC to 700 MHz
Affordable 8x8 blocking matrix with 50 ohm characteristic
impedance. Available with BNC, SMA or user specified con-
nectors. 19" rackmount chassis, 3.5" high. No LED indica-
tors. See page CX-4 of bulletin for complete specs.
MANUAL CONTROL OPTIONS
CONTROL OPTIONS
IF-5 IEEE488/RS232
This Module has both the IEEE488 (Talk /Listen) and the
RS232 features detailed in Applications Bulletin AP-5.
IF-6 LAN INTERFACE
This Module uses TCP/IP to allow control from a Local Area
Network as described in Applications Bulletin AP-5.
MC/2 KEYPAD MANUAL CONTROL W/ LCD DISPLAY
M/128-TW OR M/256-TW THUMBWHEEL CONTROLS
This manual control uses a thumbwheel selector and strobe
button to select switchpoints.
IEEE 488 BUS
RS232 SERIAL
LAN
VMC VIRTUAL MANUAL CONTROL SOFTWARE
The VMC Software allows the remote operator to view the Sta-
tus of the Matrix and to Control Switch Selection using a full
Graphical User Interface. All Windows based versions are
available. Free with any system purchase.