English page 1-20 GB C15 Deutsch Seite 21-40 D C15 Français page 41-60 F C15 Italiano pagine 61-80 I C15 Español pagina 81-100 E C15 Nederlands pagina 101-120 NL C15
ETRTO 47-305 47-406 34-540 47-507 23-571 40-559 44-559 47-559 50-559 54-559 57-559 37-590 20-571 16x1,75 20x1,75 24x1 3/8 24x1,75 26x1 26x1,5 26x1,6 26x1,75 26x1,9 26x2,00 26x2,125 26x1 3/8 26x3/4 WS in mm KMH WS in inch MPH 1272 1590 1948 1907 1973 2026 2051 2070 2089 2114 2133 2105 1954 50,1 62,6 76,7 75,1 77,7 79,8 80,7 81,5 82,2 83,2 84,0 82,9 76,9 ETRTO 32-630 40-622 47-622 40-635 37-622 18-622 20-622 23-622 25-622 28-622 32-622 37-622 40-622 27x1 1/4 28x1,5 28x1,75 28x1 1/2 28x1 3/8 700x18C 700
INSTALLATION AND OPERATION MANUAL - VDO CYTEC C 15 GB Preface Thank you for buying a VDO CYTEC bicycle computer. The more familiar you get with this model, the more enjoyable your trips are going to be. Please read thoroughly all the information provided in this manual. You are getting important and useful hints for operation to make you fully benefit from all the technical features of your VDO CYTEC bicycle computer.
2. Mounting the speed transmitter GB The sensor should be mounted on the same side of the fork as the holder is on the handlebar. C 15 Watch out: Do not tighten the cable ties yet! Accurately position the spoke magnet and the sensor first, then tighten the cable ties. 3. Mounting the spoke magnet Distance between magnet and sensor should be approx. 1-5 mm.
In case this distance is not achievable in the current positioning, slide the sensor and the magnet on the fork or spoke accordingly. GB C 15 1-5mm 1-5mm LOCK 4. Twist-Click mounting of computer onto holder UNLOCK The Twist-Click mounting has been exclusively developed for the new line of VDO CYTEC computers. The computerhead is put onto the handlebar and by a right turn of the computerhead (TWIST) fixed to the holder (CLICK). It is just as easy to remove the computerhead from the handlebar holder.
5. Installing battery into computer head GB C 15 To save battery power, your VDO CYTEC comes with the battery not yet fitted. Prior to initial use you have to install the battery first. OPEN CLOSE If you find the computer is not functioning properly after a battery change, push the AC-button (Auto Clear) on the rear side of the computer to reset.
6. Information features of your VDO CYTEC C 15 GB C 15 Your VDO CYTEC C 15 provides you with following information: KMH-MPH TRP RID STP AVS MAX TCNT CLK TOT ODO 1 ODO 2 TOTODO FRE WS 1+WS 2 current speed indicated in either KMH or MPH, featuring automatic conversion into MPH trip counter, counts your trip distance up to 999,99 km or miles.
GB C 15 7.
These buttons / keys have several functions. All functions of the respective buttons / keys outlined in the following chart below.
8. Scroll function GB To provide any information at a glance, your VDO CYTEC C 15 features C a scroll function. Calling up the scroll function automatically displays 15 information for a period of 1.5 sec. Scroll function may be called upon if any of the following information is on display: TRP-AVS-RID. Scroll function is activated by pressing the MODE 1 button for 1.5 sec. 9. Second trip counter TCNT Your VDO CYTEC features a second trip counter TCNT.
10. Manual stop-watch STP GB Your VDO CYTEC C 15 features a manual stop-watch.With information STP being displayed, you may operate your stop-watch with the SS-button. C 15 Watch out: Pressing the MODE 2 button for 5 sec. without STP data being displayed resets your TRP-AVS-RID-MAX data to zero. SS START/STOP Press MODE 2 5sec. Reset SS press when STP is displayed = starting the stop-watch SS press again = interrupt the stop-watch SS press again = stop watch continues 11.
GB C 15 Activating the FREEZE-function The FREEZE-function can be activated from any information displayed by simultaneously pressing MODE 1 and MODE 2 buttons for 0.1 sec. Having activated the FREEZE-function, the letters FRE show up in the upper LCD-segment. Your computer does not process any further impulses, only the clock CLK keeps going. Interrogating information in FREEZE-function Any information can be accessed when you are in FREEZE-mode.
. Set-up mode GB Your VDO CYTEC C 15 features the following set-up procedures wheelsize 1 = WS1 wheelsize 2 = WS2 clock = CLK odometers = ODO1,ODO2 Trip Counter=TCNT C 15 set-up starts out of TRP in display set-up starts out of TRP in display set-up starts out of CLK in display set-up starts out of ODO1, ODO2 in display set up starts out of TCNT in display No matter which set-up mode is used for your VDO CYTEC , the procedure is the same.
15. Entering your wheelsize GB C 15 You may enter two different wheelsizes into your VDO CYTEC C 15, i.e. one wheelsize for your street bike and another one for your mountain bike. Your VDO CYTEC identifies different wheelsizes as WS 1 = wheelsize 1 and WS 2 = wheelsize 2. following defaults are entered wheelsize 1 = WS1 = 2155 mm wheelsize 2 = WS2 = 2000 mm Watch out: Above defaults are automatically applied after a battery change.
Programming (setting up) your wheelsize GB Step 1: Call TRP information in your display. Step 2: Press MODE 1 button for 5 sec. "WS1" is displayed along with an alternating flashing symbol for KMH and MPH. Step 3: By pressing the MODE 2 button you can choose whether you want MPH or KMH readout on your display. C 15 Watch out: Your choice of either MPH or KMH applies for both wheelsizes WS 1 and WS 2. Step 4: Once you have chosen your measuring unit, continue by pressing the MODE 1 button briefly (0.
GB C 15 MODE 1 5sec. MODE 1 5sec. to quit MODE 2 0,1sec. to change from KMH to MPH MODE 1 0,1sec. switch to next MODE 1 to start to switch to quit MODE 2 to increase to change from KMH to MPH MODE 1 0,1sec. switch to next MODE 1 0,1sec. switch to next MODE 2 0,1sec. to increase MODE 1 0,1sec. switch to next 14 MODE 1 0,1sec.
16. Setting the clock CLK GB Your VDO CYTEC C 15 features a clock with hour and minute display. 12 h or 24 h display selectable. C 15 To access the clock set-up mode proceed as follows: MODE 1 5sec. to start Step 1: call in the CLK information into your display Step 2: Press the MODE 1 button for 5 sec. The set-up mode for the clock starts. You will either see the figure "24" or "12" flashing reflecting the hour-mode programmed. To set up your clock use MODE 1 and MODE 2 buttons (see set-up mode).
17. Programming (setting-up) your odometers ODO1 / ODO2 GB C 15 You can enter individual odometer values into your VDO CYTEC C 15 at any time, i.e. transferring data from your old computer into your new VDO CYTEC C 15 or after a battery change. Watch out: after a battery change, your data for totals ODO 1, ODO 2 and TOTODO are reset to zero. TIP: If you want to re-enter your totals after a battery change, take down the values for ODO1 and ODO 2 before removing the battery.
18. Resetting information to zero GB The following information may be reset to zero with your VDO CYTEC C 15. TRP-RID-AVS-MAX These information here is simultaneously reset to zero. TCNT This information is singly reset to zero. TOT This information is singly reset to zero. STP This information is singly reset to zero. C 15 Information must be reset to zero by pressing the MODE 2 button for 5 sec. Watch out: Take care that the exact information to be reset is on display.
GB C 15 19. Stand-by-mode Your computer VDO CYTEC C 15 features a stand-by-mode in order to save battery power. Your computer changes into stand-by-mode if it has not received any speed impulses for 5 min or no button has been pressed in the same period of time. The time of day (CLK) is still displayed in stand-by-mode, though. By pressing any button or just continuing your ride, this will end stand-by-mode and return you to the appropriate mode. 20.
22. Warranty GB We warrant VDO CYTEC models (sensor, computer head and handlebar holder) to the original purchaser for five years from date of purchase against defects in material and workmanship. This does not cover the batteries and defects resulting from normal wear and tear, improper care, accidents, abuse or alteration. C 15 Please take care to retain your receipt of purchase. In case of legitimate complaints, you are entitled to receive a comparable replacement model.
20
