Specifications

ManualsBrandsVDO CYTEC ManualsBicycle AccessoriesC 10

DXM/64x64 and DXM/128x128 SERIESDXM/64x64 and DXM/128x128 SERIES

DXM/64x64 and DXM/128x128 SERIES

FOR TECHNICAL ASSISTFOR TECHNICAL ASSIST

FOR TECHNICAL ASSIST

ANCEANCE

ANCE

, PLEASE CONT, PLEASE CONT

, PLEASE CONT

CT CYTEC ACT CYTEC A

CT CYTEC A

800-346-3117 OR VISIT OUR WEBSITE A800-346-3117 OR VISIT OUR WEBSITE A

800-346-3117 OR VISIT OUR WEBSITE A

T cytec-ate.comT cytec-ate.com

T cytec-ate.com

2555 Baird Road, Penfield, New York 14526 (585) 381-4740 FAX (585) 381-0475

SOLID STSOLID ST

SOLID ST

TE HIGH SPEED DIFFERENTIAL DTE HIGH SPEED DIFFERENTIAL D

TE HIGH SPEED DIFFERENTIAL D

SWITSWIT

SWIT

CHING MACHING MA

CHING MA

TRICES for ECLTRICES for ECL

TRICES for ECL

, PECL, PECL

, PECL

, CML & More, CML & More

, CML & More

CYTEC's DXM Series switching systems are solid state, full fan-out matrices

available in 16x16 through 128x128 configurations. At the switch fabric level,

CML Inputs are switched to CML Outputs. Input and Output Buffers are added

to allow ECL, PECL, LVPECL, LVDS or fast RS422 two wire differential signal

switching. CML supports data rates to 3.2 Gbps. Other data rates are as high as

2 Gbps (NRZ). Control is via the new IF-8 RS232/GPIB/Ethernet Control Module.

DXM CHASSISDXM CHASSIS

DXM CHASSIS

The DXM Chassis are standard 19" rack mounting anod-

ized aluminum chassis that are built with RS232, IEEE488

and Ethernet controls. Any input connects to any or even

all outputs. Systems switching Clock & Data pairs are

also available. Densi-Shield input and output connec-

tors are standard, while other connectors such as SMA

or BNC can be wired out on patch panels.

The following chassis are offered

TYPICAL APPLICATYPICAL APPLICA

TYPICAL APPLICA

TIONS INCLUDETIONS INCLUDE

TIONS INCLUDE

DXM/64x64 Mainframe Chassis

Programmable routing of fast differential signals for

telemetry applications.

Signal distribution for communications and test.

Automated patch panels.

•

SYSTEM HIGHLIGHTS:SYSTEM HIGHLIGHTS:

SYSTEM HIGHLIGHTS:

Matrices are non-blocking and full fan out.

64x64 and 128x128 chassis sizes are offered.

Modular design - Systems can be configured in

increments from 16x16 to 128x128 matrix sizes.

Different buffer modules provide for signal transfor-

mations; i.e., ECL Inputs and LVDS Outputs.

Clock/Data configurations available.

Buffer and control modules are hot-swappable.

Control via IEEE488, RS232 & Ethernet all standard.

Firmware upgrades can be downloaded from Cytec's

web site.

Chassis' Densi-Shield I/O connectors can be wired

out to patch panels with SMAs, BNC, etc.

Switch fabric cleans up signal jitter and rise times.

•

Bulletin DXM-1

A/C-In

Output 0-30 Even

Output 32-62 Even

Output 33-63 Odd

Output 1-31 Odd

Input 31-1 Odd

Input 63-33 Odd

Input 62-32 Even

Input 30-0 Even

IEEE-488

LAN

RS-232

15210

16 Input

Buffers

output

Buffers

16x16 Matrix with optional Input and Output Buffers

Custom configurations are available on request.

DXM-1

DXM/64x64 Mainframe- 5.25" high (3U) and 15.6 " deep.

Configurations range from 16x16 to 64x64 matrices.

DXM/32x32 Clock/Data Mainframe - also a 5.25"high and

15.6" deep chassis. Switches Clock & Data signals together

in parallel. Available as 16x16 or 32x32 matrices.

DXM/128x128 Mainframe- 14" high (8U) and 15.6 " deep.

Configurations from 16x16 to 128x128 are offered.

DXM/64x64 Clock/Data Mainframe- Switches Clock & Data

signals together as pairs. 8U by 15.6" deep. Available in con-

figurations ranging from 16x16 to 64x64 matrices.

DXM-E Expansion Chassis - are used to build larger sys-

tems. Multiple DXM Chassis can be controlled from one MESA

II Control Chassis shown as in the MESA Bulletin.

DXM/64x64 and DXM/128x128 SERIESDXM/64x64 and DXM/128x128 SERIES

DXM/64x64 and DXM/128x128 SERIES