Specifications

ManualsBrandsVDO CYTEC ManualsBicycle AccessoriesC 10

PX-3

TWO POLE SWITTWO POLE SWIT

TWO POLE SWIT

CH MODULESCH MODULES

CH MODULES

These Modules are available as either 2x16 Matrices or two 2x8 Matrices and with either Type S

dry reed relays, Type M mercury wetted reed relays or Type LT low thermal relays.

The inputs to the modules can be either BNC receptacles (-N), 20 pin headers (-H) or screw

terminals (-S).

Both the center conductor and isolated shield of the BNC are switched. The 20 pin header or

screw terminals can be used for shielded twisted pair cables where the signal pair is switched

and the shield is carried through the matrix.

The module outputs go to two 25 pin card edge connectors which plug into two motherboards

bussing the modules into the matrix configuration.

PX/2x16-2 SWITPX/2x16-2 SWIT

PX/2x16-2 SWIT

CH MODULECH MODULE

CH MODULE

This is a 2x16 Switch Module shown in Fig. 3 with two input

connectors and 16 outputs on two card edge connectors.

Sixteen of these modules can be assembled in the PX/512-

2A Chassis to make a 32x16 Matrix as shown in Fig. 5.

Fig. 3 PX/2x16-2 Switch Module

Fig. 4 PX/2(2x8)-2 Switch Module

PX/2(2x8)-2 SWITPX/2(2x8)-2 SWIT

PX/2(2x8)-2 SWIT

CH MODULECH MODULE

CH MODULE

This module has two 2x8 Matrices as shown in Fig. 4 with 4

input connectors and two sets of 8 outputs on the card edge

connector.

Sixteen of these modules can be assembled in the PX/512-

2B Chassis to make two separate 32x8 Matrices or bussed

on the motherboard as shown in Fig. 6 to make one 64x8

Matrix.

MAMA

TRIX CONFIGURATRIX CONFIGURA

TRIX CONFIGURA

TIONSTIONS

TIONS

Fig. 5 32x16 Matrix

Fig. 6 64x8 Matrix

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

0 1 6 7 8 9 14 15

01 67

SIGNAL MOTHERBOARD

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

0 1 2 3 4 5 6 7 60 61 62 63