VDO SERIES-Z FOR CYCLING I N S T R U C T I O N M A N U A L / B E D I E N U N G S A N L E I T U N G / M A N U E L D ´ I N S TA L L AT I O N E T D ´ U T I L I S AT I O N / H A N D L E I D I N G / M A N U A L E D ´ I N S TA L L A Z I O N E E F U N Z I O N A M E N T O I N S T R U K C J A O B S L U G I L I C Z N I K A / I N S TA L A C I O N Y O P E R A C I Ó N M A N U A L
✍ My Settings AGE: WEIGHT: MAX HEARTRATE: LIMIT 1: LOW: HIGH: LIMIT 2: LOW: HIGH: LIMIT 3: LOW: HIGH: RECOVERY TIME: RECOVERY PULSE: BIKE 1 WEIGHT: BIKE 2 WEIGHT: BIKE 1 WHEELSIZE: BIKE 2 WHEELSIZE: BIKE 1 SERVICE INTERVALL: BIKE 2 SERVICE INTERVALL: HOME ALTITUDE: FURTHER SETTINGS:
Picturebook P01 ONLY FOR MODELS Z2 PC-LINK / Z3 PC-LINK CD-ROM PC-Sport * 8x * Watch out: old batteries require special disposal Please read instructions for end-off-life disposal treatment
Picturebook P02 OPEN CLOSE ! OPEN CLOSE !
Picturebook P03 ONLY FOR MODELS Z2/Z2 PC-LINK Z3/Z3 PC-LINK ! OPEN CLOSE
Picturebook P04/05 90°
Picturebook P06 LOCK UNLOCK 2.CLICK 1.LOCK 2.
Picturebook P07 1-5 mm
Picturebook P08 ONLY FOR MODELS Z2/Z2 PC-LINK Z3/Z3 PC-LINK
Picturebook P09 P09-2 CLOSE OPEN
Picturebook P10 1x WS in mm / inch Tire size 47-305 47-406 34-540 47-507 23-571 40-559 44-559 47-559 50-559 n/a 54-559 n/a 57-559 37-590 16x1,75 20x1,75 24x1 3/8 24x1,75 26x1 26x1,5 26x1,6 26x1,75 26x1,9 26 x 1,95 26x2,00 26 x 2,1 26x2,125 26x1 3/8 WS in mm KMH WS in inch MPH 1272 50,1 1590 62,6 1948 76,7 1907 75,1 1973 77,7 2026 79,8 2051 80,7 2055 80,9 2060 81,1 2070 81,5 2075 81,7 2080 81,9 2133 84,0 2105 82,9 Tire size 20-571 32-630 40-622 47-622 40-635 37-622 18-622 20-622 23-622 25-622 28-622 32-
Picturebook P11 ONLY FOR MODELS Z2 PC-LINK Z3 PC-LINK
EN Congratulations With your selection of a VDO Z1 you have opted for high-quality sports information computer. In order to fully benefit from the potential of the computer, we recommend that you carefully read this manual. It contains all operating instructions and many useful tips. We extend our best wishes for enjoyment and satisfaction when riding with your VDO computer.
INSTRUCTION MANUAL TABLE OF CONTENTS 1.1. GENERAL 1.2. IMPORTANT INSTRUCTIONS FOR THE DIGITAL WIRELESS SYSTEM 1.3. Control system - operation 1.3.1. Operating mode 1.3.2. Setting mode 1.4. The display 1.5. Extension options & accessories 2. INSTALLATION 2.1. Battery installation 2.1.1. Battery installation - computer and speed/cadence transmitter 2.2. Installation - holder/computer/transmitter/magnet 2.3. Mounting the computer on the wrist band 3. INITIAL OPERATION 3.1. Initial operation, AC-button 3.2.
EN 10. OPERATION MODE SELECTION Selecting the operation mode: Bike mode or walk mode 11. OPERATION MODE 11.1. Function overview 11.2. Fast pairing after interruption > 15 minutes 11.3. GETTING STARTED 11.3.0. The permanent functions in the display 11.3.1. to 11.3.28. Quick overview - functions/operation/reset/max. values 12. RIDING WITH THE NAVIGATOR 12.1. Selecting Navigator mode 12.2. Resetting the Navigator at the orientation point 13. THE TIMING FUNCTIONS 13.1. Selecting the timing function 13.2.
INSTRUCTION MANUAL 1.1. GENERAL 1.2. IMPORTANT INSTRUCTIONS FOR THE DIGITAL WIRELESS SYSTEM Your VDO series Z1 works entirely without cable; it works with double digital wireless transmission based on well-established ANT+Sport® wireless protocol. The ANT+Sport® wireless protocol has already been successfully implemented by manufacturers such as Garmin, Specialized, and Suunto. Speed signals, cadence signals (optional) to the respective receiver (computer) as digital and coded signals.
EN 1.3.1. OPERATION MODE - use this mode to display all information Button assignment is shown on the housing.
INSTRUCTION MANUAL 1.3.2. SETTING MODE - use this mode to make all settings. The assignment of buttons is on the buttons To go to setting mode: Press button ç for 3 seconds SETTING MODE or LANGUAGE SELECT Chap. 4.1. HOME ALTI SET Chap. 8.1. NAVIGATOR SET Chap. 12.1. ACTUAL ALTI SET Chap. 8.2. WHEELSIZE SET Chap. 5.1. ALTI UP SET Chap. 8.3. WHEELSIZE CHANGE Chap. 5.2. ALTI DOWN SET Chap. 8.4. CLOCK SET Chap. 4.2. PERSON DATA SET Chap. 6.1. ALARM SET Chap. 4.3. OP MODE SELECT Chap.
EN 1.4. THE DISPLAY The display of your VDO computer is comprised of three large areas. The following information is displayed in operation mode: Header - Actual altitude - Actual temperature - Actual ascending gradient/ descending gradient 3. Footer: DOT matrix full-text - display of the selected/displayed function - In setting mode menu prompting (chapter 5-8) provides information about what is shown in the display.
INSTRUCTION MANUAL 1.5. EXTENSION OPTIONS & ACCESSORIES Extension option: You have the possibility of extending your computer with the cadence extension set In this case the following cadence functions are available to you: Actual cadence Average cadence Maximum cadence ORIGINAL EQUIPMENT In addition you can also get the following original VDO replacement parts from your dealer Designation article number Universal handlebar holder - wireless art. no. 5503 Magnet S/M for speed impulses art. no.
EN 2.2. INSTALLATION - HOLDER/COMPUTER/TRANSMITTER/MAGNET a. Holder >>> P04 / 05: Your VDO computer is shipped with a universal handlebar holder. step 1 You can mount the holder either on the handlebar or the stem. If you are installing the holder on the handlebar decide whether you want it on the right side or the left side. If installing on the stem, loosen the screws in the holder and turn the foot of the holder to stem installation. Then screw the foot firmly onto the holder again.
INSTRUCTION MANUAL step 2 step 3 ‚ ∂ ƒ step 4 ‚ Confirm LANGUAGE SELECT with M Press the up or down button until the desired language appears Confirm your language selection with M 3.3.1. MANUAL PAIRING - INITIAL OPERATION WIRELESS SYSTEM For initial operation of the digital wireless system manual pairing must ALWAYS be executed. Manual pairing ensures that the computer learns the coding of the transmitter you are using.
EN IMPORTANT NOTE / Re-open of transmitter search for the receive channel after interruption If no signal is received from an already paired transmitter after 15 minutes (for example riding without chest belt for Z2 and Z3, also PC-LINK models), the receive channel will be closed for this transmitter. In this case your VDO computer will show dashes for the respective function in the display.
INSTRUCTION MANUAL then all values calculated on the basis of this value, such as speed, trip, etc. will be wrong. To use your VDO computer on two different bikes e.g. mountain bike and road bike you can enter two different wheel sizes.
EN Wheel size set done Display of the actual wheel size in the center bar of the display, right bottom (1 or 2) 5.3. SETTING TOTAL KILOMETERS You can program the total distances into your VDO computer that get lost when changing batteries or that you have previously counted with a different device. This function is available for both wheel sizes (both bikes). Setting total KM 1 or 2 3 sec.
INSTRUCTION MANUAL ∂ ƒ Setting weight ‚ SET SEX ?CONTINUE? ∂ ƒ Setting sex (M = male, F = female) ‚ PERSON DATA ?SET OK? ‚ PERSON DATA SET DONE Automatic return to operation mode for the selected timer. SET WEIGHT ?SET OK? (Note: This is where the bike weight, including panniers if necessary, is entered) ∂ ƒ Setting the weight in kg ‚ POWER CALC SET DONE Automatic return to the mode for POWER WATT Set watt calculation done 7.POWER CALCULATION IN WATT 7.
EN different weather conditions at the various points of the trip. You should make corrections so that the measurement is as accurate as possible. Tip home altitude: You can obtain the correct information for the altitude of your home location or your usual trip starting point from your local weather bureau. ∂ ƒ Setting the actual altitude ‚ ACTUAL ALTI ?SET OK? ‚ ACTUAL ALTI SET DONE Automatic return to the operation mode for ALTI UP.
INSTRUCTION MANUAL ∂ ƒ ‚ Setting the first digit ALTI UP 1 SET DONE / ALTI UP 2 SET DONE / WALK UP SET DONE Automatic return to the operation mode for TOTAL UP. Annual uphill altitude gain set done. 8.4. ANNUAL DOWNHILL ALTITUDE LOSS BIKE 1 AND BIKE 2 AND WALK MODE Setting the annual downhill altitude loss 3 sec.
EN ‚ TRIP DATA RESET DONE Automatic return to operation mode for TRIP DIST 9.2 RESET TOTAL RIDE TIME ATTENTION: When resetting total ride time the following data is deleted: - Total ride time - Total ride time bike 1 - Total ride time bike 2 3 sec. √ TRIP DATA ?RESET? ∂ ƒ TOTAL TIME ?RESET? ‚ TOTAL TIME ?RESET? <> flashing ‚ TOTAL TIME RESET DONE? Automatic return to the operation mode for TOTAL TIME Reset total time done 9.3.
INSTRUCTION MANUAL Select operation mode: 3 sec. ç Setting mode LANGUAGE SELECT ∂ ƒ OP MODE SELECT ‚ CYCLE MODE ?SET OK? ∂ to change to WALK MODE ?SET OK? ‚ Automatic return to the operation mode for TRIP DIST (in cycle mode), or ALTI UP (in walk mode) 11. OPERATION MODE 11.1. An overview of mode functions is provided in section 1.3.1. 11.2 FAST PAIRING after transmission interruption If no signal is received from one of your already paired transmitters for more than 15 minutes (e.g.
EN This resets all data of the functions marked by L Automatic return to operation mode for TRIP DIST Note: The minimum altitude change for the correct distance measurement must be 1 m 11.3.3. ¬ £ TRIP MAX = maximum altitude of the actual trip Display ¥ TRIP MAX Reset: 3 sec. √ TRIP DATA ?RESET? ‚ TRIP DATA ?RESET? <> flashing ‚ TRIP DATA RESET DONE This resets all data of the functions marked by L Automatic return to operation mode for TRIP DIST. 11.3.4.
INSTRUCTION MANUAL Display Reset: 3 sec. ¥ „Dschn down“ √ TRIP DATA ?RESET? ‚ TRIP DATA ?RESET? <> flashing ‚ TRIP DATA RESET DONE This resets all data of the functions marked by L Automatic return to operation mode for TRIP DIST 11.3.11. ¬ MAX DOWN = maximum downhill gradient in percent Display ¥ MAX DOWN Reset: 3 sec.
EN Reset: 3 sec. √ TRIP DATA ?RESET? ‚ TRIP DATA ?RESET? <> flashing ‚ TRIP DATA RESET DONE L Automatic return to operation mode for TRIP DIST Maximum value 120 km/h or mph. Accuracy 2 decimal places. Not suitable for motorcycles. OPTION ONLY WITH CADENCE EXTENSION 11.T1. ¬ CAD AVG = average cadence of the actual trip Display ç CAD AVG Reset: 3 sec. √ TRIP DATA ?RESET? ‚ TRIP DATA ?RESET? <> flashing ‚ TRIP DATA RESET DONE L Automatic return to operation mode for TRIP DIST. 11.T2.
INSTRUCTION MANUAL Display √ ODOTOTAL Maximum value 199,999 km or mi 11.3.22. ¬ TIME BIKE 1 = total time bike 1 Shows the total time of all day trips ridden with bike 1 in hhh:mm Display √ TIME BIKE 1 Maximum value 999:59 hhh:mm 11.3.23. ¬ TIME BIKE 2 = total ride time bike 2 Shows the total time of all day trips ridden with Bike 2 in hhh:mm Display √ TIME BIKE 2 Maximum value 999:59 hhh:mm 11.3.24.
EN 12. RIDING WITH THE NAVIGATOR With the VDO Navigator you can complete trips according to Roadbooks (e.g. Moser Guide). Roadbooks are offered by many publishing houses for fantastic trips (for road bikes as well as mountain bikes) by many publishing houses. Taking a specified trip is facilitated thanks to the detailed km description of certain orientation points. Note: This function is not available in walk mode. The VDO Navigator is an independent km or mi counter and works in the following modes: a.
INSTRUCTION MANUAL training. TIMER 2 counts from zero forward. At the end of TIMER 2 there are two beeps. Timer 2 only functions if you have set a time. If you have forgotten to set a time your VDO computer displays TIMER ERROR TIMER 1+2 runs until you stop these functions. Timers 1 + 2 only function if you have set a time. If you have forgotten to set a time your VDO computer displays TIMER ERROR. COUNTDOWN: You can program a time, the timer will count backwards from this time.
EN ‚ TIMER ?SET OK? ‚ TIMER SET DONE Automatic return to the operation mode for TIMER 1/2. If you have not yet set any values for timer 1, and/or timer 2, then your VDO computer will now show ERROR in the display. 13.3. SETTING TIMER 1 + 2 REPEATS (when selecting timer 1 + 2) 3 sec.
INSTRUCTION MANUAL Now the display shows temperature, time, date, and day of the week. .After an additional 10 minutes the second phase of sleep mode will be activated, the receiver will be switched off. FOR WAKE UP press any button.
EN No cadence display No speed display (dash in the display) No cadence data (dash in the display) 30 - Check the magnet position (distance between magnet and transmitter, position of the magnet to the transmitter point on the transmitter) - Check the battery in the transmitter - Check the battery in the computer (if battery voltage is insufficient then the receiver cannot receive the signals) The receive channel for speed is switched off (a 15-minute period has elapsed without receiving a speed signal
INSTRUCTION MANUAL 16. GUARANTEE CONDITIONS VDO Cycle Parts offers a 5-year guarantee on your VDO computer, starting from date of purchase. The guarantee extends to material and manufacturing defects on the computer itself, on the docking station, on the transmitters and on the handlebar and wrist band holder. Cable and batteries, as well as other mounting materials are excluded from the guarantee.
GB #56' .'%64+%#. .'%6410+% 37+2/'06 22.+%#$.' +0 6*' 7412'#0 0+10 #0& 16*'4 7412'#0 %17064+'5 9+6* 5'2#4#6' %1..'%6+10 5;56'/5 *+5 /#4-+0) 5*190 10 6*' 241&7%6 14 +65 .+6'4#674' +0&+%#6'5 6*#6 +6 5*17.& 016 $' &+5215'& 9+6* 16*'4 *175'*1.& 9#56'5 #6 6*' '0& 1( +65 914-+0) .+(' 1 24'8'06 2155+$.' *#4/ 61 6*' '08+410/'06 14 *7/#0 *'#.6* (41/ 70%10641..'& 9#56' &+5215#. 2.'#5' 5'2#4#6' 6*+5 (41/ 16*'4 6;2'5 1( 9#56'5 #0& 4'%;%.' +6 4'52105+$.
RO 2 4'<+&774+ 2418'0+0& &+0 #2#4#674i '.'%64+%i h+ '.'%6410+%i #4%#,'.' &' 2' #%'56 241&75 5#7 /'0g+10#6' O0 +05647%g+70+.' 5#.' &' (1.15+4' +0&+%i (#267. %i 241&757. 07 64'$7+' #470%#6 O/24'70i %7 #.6' 4'<7&774+ &+0 )1521&i4+' #670%+ %E0& 07 /#+ '56' O0 56#4' &' (70%g+10#4' '0647 # 24'8'0+ 215+$+.' '('%6' &i70i61#4' #5724# /'&+7.7+ O0%10,74i614 5#7 # 5i0i6ig++ 1#/'0+.14 ɦ#6' '8#%7i4++ 0'%10641.#6' # 4'<+&774+.14 8i 47)i/ 5i 5'2#4#g+ #%'56 241&75 &' #.
I 4+=76+ '.'664+%+ '& '.'66410+%+ 22.+%#$+.' +0 + 2#'5+ &'.." 0+10' 7412'# ' +0 37'..+ %10 5+56'/# &+ 4#%%1.6# &+(('4'0<+#6# /#4%*+1 4+2146#61 57. 241&1661 1 57..# 57# &1%7/'06#<+10' +0&+%# %*' +. 241&1661 010 &'8' '55'4' 5/#.6+61 %10 #.64+ 4+=76+ &1/'56+%+ #. 6'4/+0' &'. %+%.1 &+ 8+6# '4 '8+6#4' '8'067#.+ �+ #.."#/$+'06' 1 #..# 5#.76' %#75#6+ &#.."+0122146701 5/#.6+/'061 &'+ 4+=76+ 5+ +08+6# ."76'06' # 5'2#4#4' 37'561 241&1661 &# #.
EE % ' , '.'-64+.+56' ,# '.'-64110+.+56' 5'#&/'6' ,FF6/'& '..+0' 6F*+5675 6116'. 8T+ 5'..' &1-7/'06+&'. 0F+6#$ '6 611&'6 '+ 61*+ -#57675#,# .T22'/+5'. -T48#.&#&# -115 /77&' 1./',FF6 /'6')# '..'-5 '6 8F.6+&# ,FF6/'6' -10641..+/#67 -T48#.&#/+5')# 5'167& 8T+/#.+-7 -#*,7 6'-+6#/+56 -'5--100#.' 8T+ +0+/'56' 6'48+5'.' 0+0) '&'0&#&# /#6'4+##.5'6' 8#*'0&+6' 5FF568#6 6##5-#576756 '4#.&#)' 611&' /77&'56 ,FF6/'6'56 ,# 5770#-' 6##54+0).
LV # 1 1 # 0- 01.+'616#5 '.'-64+5-c5 70 '.'-6410+5-c5 +'4b%'5 < +<564c&c,7/# 8#+ 6#/ 2+'8+'016#,c5 +05647-%+,c5 &16#+5 /#4a`,7/5 014c&# -k 61 0'&4b-56 .+-8+&`6 -12c #4 %+6+'/ 5#&
P )( '5N&71 &' 37+2#/'0615 .K%64+%15 ' .'%64Q0+%15 56# /#4%# #24'5'06#&# 01 241&761 17 0# 57# .+6'4#674# +0&+%# 37' '.' 0I1 &'8'4D 5'4 '.+/+0#&1 ,706#/'06' %1/ 15 4'5N&715 &1/K56+%15 +0&+('4'0%+#&15 01 =0#. &1 5'7 2'4N1&1 &' 8+&# V6+. #4# +/2'&+4 #1 #/$+'06' ' G 5#V&' *7/#0# %#75#&15 2'.# '.+/+0#JI1 +0%10641.#&# &' 4'5N&715 &'8'4D 5'2#4#4 '56' '37+2#/'061 &' 176415 6+215 &' 4'5N&715 ' 4'%+%.D .1 &' (14/# 4'52105D8'. 2#4# 241/18'4 7/# 4'76+.
SLO # # 1&2#&0# '.'-64+u0# +0 '.'-64105-# 124'/# <0#-# 0# +<&'.-7 #.+ 524'/.,'8#.0+ &1-7/'06#%+,+ 21/'0N &D )# 0# -10%7 7214#$0' &1$' 0' 5/'/1 1&564#0,'8#6+ 5-72#, < &47)+/+ )1521&+0,5-+/+ 1&2#&-+ D $+ 24'24'u+.+ /14'$+601 68')#0,' <# 1-1.,' #.+ <&4#8,' u.18'-# <#4#&N 0'0#&<1418#0')# 1&564#0,'8#0,# 1&2#&-18 +<&'.'- .1u+6' 1& &47)+* 8456 1&2#&-18 +0 )# 1&)181401 4'%+-.+4#,6' 6K4 6#-1 521&$7&+6' 64#,015601 2101801 7214#$1 /#6'4+#.
D EU-Konformitätserklärung Wir, CYCLE PARTS GmbH, Grosse Ahlmuehle 33, D-76865 Rohrbach erklären, dass die VDO Fahrradcomputer mit Funkübertragung VDO Z1, Z2, Z3, Z2 PC-Link, Z3 PC-Link und alle Sender Z-CAD, Z-PULSE, Z-SENDER, Dockingstation bei bestimmungsgemäßer Verwendung den grundlegenden Anforderungen gemäß Artikel 3 der R&TTE-Richtlinie 1999/5/EG entsprechen. Die Konformitäts-Erklärung finden Sie unter www.vdocyclecomputing.com.
USA CDN ADDENDUM TO USER MANUAL NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
USA CDN ADDENDUM TO USER MANUAL NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
VDO SERIES-Z FOR RUNNING / HIKING CYCLECOMPUTING w w w. v d o c y c l e c o m p u t i n g .
