Instruction manual

GB
MC
1.0
14
2.9 Manual operation of the STOPWATCH
Your VDO MC 1.0 features a manual stopwatch in addition to the ride-timer with automatic Start/Stop function. The manual stopwatch is counting up to
19:59:59 HH:MM:SS There are two ways to call in the stopwatch and simultaneously start it:
Direct Start:  By pressing M1 and M2 briefly the stopwatch is called in and started simultaneously. Starting downhill a brief pressing of M1 and M2 will do to 
call in the stopwatch and start it at the same moment.
Delayed Start: By pressing MODE1 the stopwatch is called in. By then pressing MODE1 and MODE2 briefly the stopwatch is started. With the stopwatch 
running you might as well call further information in your display. The stopwatch will keep running in the background. Display indication will show 
that the stopwatch is running.
3. Resetting information to zero
By pushing MODE2 for 3 sec information / data is reset to zero.
Following trip data is simultaneously reset to zero:
TRIP DIST--RIDE TIME--AVG SPEED--MAX SPEED--TRIP ALTI--MAX ALTI--AVG CLIMB--MAX CLIMB
Following data may be individually reset to zero, if desired so:
NAVI GATOR
Call NAVI GATOR information in your display. Push M2 for 3 sec to reset this data to zero.
STOP WATCH
Call STOP WATCH information in your display. Push M2 for 3 sec to reset this data to zero.
TOTAL ALTI--TOP ELVTN--ODO TOTAL
These summarizing functions (total altitude climbed / highest elevation reached Total Odometer) are especially protected to unintended erasing / resetting.
These informations can only be reset by changing battery or by pressing AC-button on backside of computer.