Specifications

Section 1: Introduction 9/44
GENERAL SAFETY CONDITIONS
When the machine is put on work for the first time and at start up each day, the automatic cycle, the normal work
cycle and, in fact, whenever the machine is used, the following general safety conditions must be applied:
- Before starting the machine, read this manual completely and carefully and apply all the safety prescriptions it
details.
- Publicise the contents of this manual with all the people who work with the machine and also with those in
charge of safety matters in general.
- Observe general work site hygiene and safety regulations, industrial accident prevention regulations and the
prohibitions posted by the manufacturer of the machine to protect people from injury and the machine from
damage.
- Do not become over-confident in the use of the machine. Always pay complete attention to what you are doing.
Before confirming an operation, check to make sure that everything is in perfect working condition.
GENERAL SAFETY REGULATIONS
It is very important for the user to observe meticulously all industrial accident prevention regulations.
Furthermore, notices should be affixed to the sides of the machine to ensure immediate visual
identification of dangerous conditions. These notices should have the following specifications:
TRIANGULAR To identify danger
ROUND To identify prohibited/obligatory actions
RECTANGULAR To give information
PERSONAL PROTECTION EQUIPMENT
When you are working on or near the machine, installing it or during routine maintenance and regulation, observe
general industrial accident prevention regulations and, in particular:
Wear safety footwear (with steel reinforced toe-cap).
Do not work with your bare hands.
Wear adequate gloves.