Specifications

Section 1: Introduction 7/44
WHO TO CONTACT FOR A PROBLEM
When the need arises, the customer can contact our Technical Assistance Service by calling the following
numbers:
In ITALY 0521 872321
from abroad ++39 0521 872321
This service offers the customers the solutions to the various problems that can crop up or will provide an on-site
visit by a specialist Service Engineer.
Many technical problems can be solved by very minor service work. We, therefore, recommend reading this
Manual carefully before contacting our Technical Assistance Service.
IDENTIFICATION PLATES
Identification plates and stickers are especially important down the years since they ensure that the manufacturer
can supply the customer, quickly and correctly, technical information and support services of every kind.
Do not modify or remove the information needed to identify the machine. The actual identification data are
indelibly stamped and engraved on a plate. These data comprise everything needed to recognise the machine
and should be included in correspondence between the user and the manufacturer-e.g., when asking for Technical
Assistance, ordering spare parts, etc.
IT IS ABSOLUTELY FORBIDDEN TO REMOVE OR TAMPER WITH THE IDENTIFICATION PLATE.
The following data are stamped on the plate:
Essential data to be specified in all correspondence between user and manufacturer:
S.p.a.
43010 S. Quirico di Trecasali
(Parma) - Italy
MACHINE MODEL
YEAR OF CONSTR.
SERIAL NUMBER
The machine’s Identification plate is located on the right side of the machine (looking at the machine
from the front drawbar).
MACHINE MODEL
This identifies the model of the machine, the diameter (in
mm) and length (in m) of the hose.
YEAR OF CONSTRUCTION
Specifies the year the machine was built.
SERIAL NUMBER
Specifies the machine’s Serial Number.