Specifications

INSTRUCTION AND MAINTENANCE MANUAL
The drawings and the technical data are R.M. S.p.a. - © R.M. S.p.a. - Revision 01.01.200728/44
VDO C05 CYTEC INSTRUMENTS:
1) Press some times the key to display ODO and then press the key for at least 3 seconds.
2) Now m/h and km/h are gleaming alternatively; when km/h is displayed, press the key to fix it.
3) The instrument is now automatically proposing the programm number (4 digits). The first digit on right starts
gliding; when the correct number is displayed, press the key to confirm it. Do the same procedure for all other
digits.
4) Now the display shows another number (5 digits); repeat the above procedure until all digits are setted on
ZERO.
5) At the end, take the instrument on CLK again by pressing the key.
SETTING THE CLOCK
To set the clock on the model VDO SPRINT, press MODE key for at least 2 seconds until CLK is displayed; press
SET key for at least 3 seconds, then press MODE key again to choose the 12 or 24 hours time and fix it with SET
key; press MODE key until the desired time is displayed; then press SET key to fix the exact time.
To set the clock on the model VDO EURO, press MODE key until the symbol CLK is displayed (clock setting);
press SET key for at least 3 seconds, then press MODE key again until the desired time is displayed. Press SET
key to fix the exact time.
On model VDO CYTEC C05, press the key once or more to display CLK. To modify the actual time, already
displayed, press the key for some seconds until the time only is dispalyed. Now the digit indicating hour is gliding.
When the correct number is displayed, press the key to fix it and repeat the same procedure for the minutes,
which have started to glide too. At the end, take the tachometer on CLK again by pressing the key.
TROUBLE-SHOOTING THE VDO SPEEDOMETER
Problem: The speed is not displayed or the function symbol ((1)) doesn’t sparkles while the machine is
working.
Remedy: a) Check if the wire between the transmitter and mounting has been damaged or broken.
Check if it has been crimped.
b) Check if the display unit has been pushed all the way down in its mounting to make a
perfect contact. Check if the contacts are clean.
For VDO Cytec C05: position the head of the computer on the support and turn until You
can hear a “CLICK”.
c) For VDO Cytec C05: check the exact distance between the sensor and the magnet and
adjust the distance between them, if necessary.
Problem: Incomplete numbers and letters appear on the display.
Remedy:
Press the AC button on the back of the unit (Fig. 4) to cancel all the settings memorised. Reprogram
the instrument following the instructions given above.