Specifications

Section 2: Handling 13/44
STORING THE MACHINE
If the machine is not installed immediately and needs to be stored temporarily, it must be stored in a dry covered
place.
DISPOSING OF THE COMPONENTS
The estimated working life of the machine is 25,000 work hours under normal conditions. At the end of the
machine's working life, the owner must dispose of it in full compliance with current regulations. First, all lubricants
should be emptied out and all the parts cleaned. Then the various materials making up the machine should be
separated.
Each type of material can then be disposed of in compliance with the regulations current in the country where
the machine is operated in.
WARNING
MATERIALS USED IN THE MACHINE:
MATERIAL USE
PAINTED METAL Chassis
HOT GALVANISED IRON Rain gun skid
NICKEL PLATED IRON Fittings
POLYETHYLENE (PEMD) Hose
RUBBER Tyres, sleeves
CAST IRON Gear unit box, hose slide
During disposal, observe all regulations in force in your country. Store polluting material
such as oil and solvents in metal containers.