Operation Manual

7. Press “c/d” button to select “Tint” and press the “e/f” button to enter hue adjustment menu

to adjust tint.

Note:

The 'Tint' item is used in NTSC mode only

8. Press “c/d” button to select “Color Temperature” and press the “e/f” button to select the

color temp.

9. Press “c/d” button to select “Red” and press the “e/f” button to adjust.

10. Press “c/d” button to select “Green” and press the “e/f” button to adjust .

11. Press “c/d” button to select “Blue” and press the “e/f” button to adjust .

12. Press “c/d” button to select “Aspect Ratio” and press the “e/f” button to select the size

which you desire.

Note: When the current source is “PC”, the “Aspect Ratio” item only has two options for

“16:9” and “4:3”.

13. Press “c/d” button to select “Noise Reduction” and press the “e/f” button to select open or

close the noise reduction function .

SOUND

You can select the type of sound, which best

corresponds to your listening.

1. Press the “MENU” button to enter the OSD

menu. Then press “e/f” button to select the

“SOUND” menu. Enter the “SOUND” menu

by pressing “d” button or “ENTER” button.

2. Press “c/d” button to select “Sound Mode”

and press the “e/f” button to select the

sound mode.

3. Press “c/d” button to select “Treble” and

press the “e/f” button to adjust.

4. Press “c/d” button to select “Bass” and press the “e/f” button to adjust.

5. Press “c/d” button to select “Balance” and press the “e/f” button to adjust.

6. Press “c/d” button to select “Auto Volume” and press the “e/f” button to select “On” or

“Off” .

This reduces the effect of sudden changes in volume of the source.

Press “c/d” button to select “Surround Sound” and press the “e/f” button to select

“Surround” or “Off”.

Note: This creates a surround sound effect, but is not true surround sound.