TQD2210VD.
Contents Quick Installation Guide......................................................... Important safety instructions................................................. 1 2 Setting up and using your TV................................................ 5 What's included with your TV................................................ 7 Sockets on the back of your TV............................................. 8 Remote Control Instruction....................................................
TQD2210VD.001 Quick Installation Guide English : TV Channel Setting FIRST INSTALL GUIDE When you turn on your unit for the first time. The FIRST INSTALL GUIDE will display on the screen. FRANCE LANGUAGE ENGLISH Press the ▲/▼ button to select the AREA , then press the ◄ / ► button to adjust the area Press the ▲/▼ button to select the LANGUAGE , then press the ◄ / ► button to adjust the language Press the ▲/▼ button to select AUTO SEARCH, and then press ENTER.
Important safety instructions Warning Do not let your TV become wet(for example, by keeping it in a damp room, leaving it outside or dripping water on it). You must not put objects filled with water on your TV (including vases of water). 1. Read these instructions carefully. 2. Keep these instructions in a safe place. 7.Do not put your TV near any heat source (such as radiators or stoves), or near equipment (including amplifiers) that produce heat. 3.Follow all the instructions. 4.
Important safety instructions 11.Only use TV trolleys ,stand s ,tripods or table s that we approve. If you use a trolley /table with your TV, be careful when you move it. S o that it doesn't tip over. 12.Unplug your TV both power and antenna during lightning storms or when you won't be using it for a week or more. 13.If your TV needs repairing, use a qualified service technician. If you damage your TV, it will need to be serviced. 14.Be careful when you plug the power cord into a socket.
Important safety instructions You will see these stickers on your TV. This symbol means there are wires in your TV which are not insulated. If you touch these wires, you may get an electric shock. This symbol means you should read the servicing guide before you take further action. -You should not service your TV unless you are qualified to do so. If your TV breaks down, contact a qualified TV engineer. -Make sure you plug in your TV securely.
Setting up and using your TV 1.Check the voltage shown on the serial number or rating label on your TV, and make sure your TV is compatible with the voltage in your home. If you are not sure about the voltage you have in your home, please contact your distributor or an electrician. 2.Make sure you plug the power cable into the socket securely. If you have problems plugging in your TV, please contact the shop you bought your TV from to replace the power cable.
Setting up and using your TV Do not try to repair your TV yourself. There is high voltage inside it and you could receive an electric shock. Safety notice Your TV has a CE marking. This means your TV meets both the EMC directive (89/336/EEC), (93/68/EEC) and the Low Voltage Directive (73/23/EEC) that the European Community have issued. When you need to throw your TV away Please contact the shop that sold you your TV when you need to throw it away. 1.
What is included with your TV What your TV should look like What is included with your TV User guide Remote control Power cord Screw Driver and screws TQD2210VD.001 10 10+ ME DI A User Guide LCD TV with DVD How to use your remote control 1.Take the back cover off your TV remote and put two AAA batteries into the remote control. Make sure the + and - symbols on your batteries match the diagram . 2.Replace the batteries. So they are facing the right way.
Sockets on the back of your TV STANDBY Remote Sensor Power Indicator Insert the disc with the mirror side facing yourself Connections panel 1 11 10 9 8 6 5 4 3 2 7 1. Power: Main power input. 2. USB: Connect to portable usb device. 3. HDMI: Connect the HDMI output jack of DVD. 8. VIDEO: Connect the Video output jack of DVD or VCR. 9. L/R AUDIO INPUT: Connect the Video/YPbPr Audio output jack of DVD. 4. VGA: Connect a computer to these jacks. 5. PC AUDIO: Connect the Audio output jack of PC.
Remote control instruction in TV mode 10 10+ STANDBY Turn the TV ON or OFF. SOURCE Press to cycle through the input source in following: PMODE Press repeatedly to cycle through the available video picture modes. SMODE Press to cycle through the different sound settings. SLEEP Select amount of time. Let your TV turn off automatically. MUTE Press to mute the sound. Press again or press V+ to un-mute the TV. NUMBER BUTTONS Press 0-9 to select a TV channel directly when you are watching TV.
Remote control instruction in TELETEXT mode NUMBER BUTTONS Press 0-9 to select a teletext page. 10 1 0+ TEXT Press to switch between TV and Teletext mode. COLOUR BUTTONS Select 4 Preferred TELETEXT page. MEDIA HOLD Freeze the current page. REVEAL Reveal or hide the hidden words. SIZE Change the picture size. SUBTITLE To display subtitle. SUBPAGE TELETEXT Subpage. INDEX Request index page when index link is valid. MIX TV and TXT pictures are mixed together in transparent background.
Remote control instruction in DTV mode MEDIA MEDIA Press to select MEDIA mode.
MEDIA 12
DVD STANDARD BACK BACK 13
. . . . . . . BACK . . . . . . .
CHILD LOCK BACK 15
CHILD LOCK CHILD LOCK LOCK ENTER PASSWORD _ DELETE _ 0~9 _ NUMBER _ EXIT The default password is “0000” LOCK LOCK CHANGE CODE LOCK select ON or OFF. CHANGE CODE Press UP/DOWN button to select CHANGE CODE. Then press ENTER or OK button to enter the submenu to change the code.
FRANCE BACK ● 17
CHILD ARD PLA DK OFF OFF PLA DK OFF OFF OFF OFF OFF OFF CHILD 18
19
FRANCE 20
21
Rename 22 OK Select
23
24
25
FRANCE FRANCE 26
27
28
BACK 29
► ◄◄ ◄◄ ► ► 30 ►► ◄
DVD Function General setup - Press ▲/▼ buttons to move and highlight between different sub-menus. Press highlighted sub-menu. ENTER button to enter the - Press DVD SETUP button to exit the OSD menu. System Setup TV SYSTEM - Press ► button to enter the TV SYSTEM and then press ▲ / ▼ to select one from below: SYSTEM SETUP NTSC This format is used by some other countries, e.g. USA PAL This is the format used in UK for example.
OFF: Choose this setting to cancel the screen saver TV TYPE DVD's are produced in a variety of screen aspect ratios. This menu enables you to select one of the three aspect ratios: SYSTEM SETUP 4:3 PS (Normal) 4:3 LB (Normal) 16:9 (Wide) - Select the most appropriate aspect ratio for the JPG being viewed. NOTE: - Playback screen size may vary according to the disc contents.
Rating restriction is divided into eight different category from KID NOTE: Only editable when password is unlocked. POWER RESUME ON: Choose this setting to activate the power resume. OFF: Choose this setting to cancel the power resume. DEFAULT SETTING - Press ENTER button to restore factory default.
OSD LANGUAGE Use navigation buttons to select the OSD LANGUAGE setup icon, press ENTER button to confirm. There are Multi languages DUTCH AUDIO LANGUAGE Use navigation buttons to select the AUDIO LANG setup icon, press ENTER button to confirm. There are Multi - languages for your selection. Press ▲ / ▼ buttons to toggle between different languages. Press ENTER button to confirm. DUTCH SUBTITLE LANGUAGE Use navigation buttons to select the SUBTITLE LANG setup icon, press ENTER button to confirm.
DUTCH Audio Setup TONE - Use the Up and Down arrow button to move the scroll and adjust the TONE.
- Switch the compress mode to “Audio output” to adjust the compress ratio for different effects. When selected FULL, the peak signal value is smallest. When selected OFF, the peak signal value is largest. DUAL MONO - You can select four different audio output, STEREO, MONO L, MONO R, MIX MONO. The audio out description of these Selections is shown in the table below.
If you're having problems If you are having problems with your TV, carry out the following checks first. If you are still having problems, unplug your TV and contact the service centre. Problems and how to fix them There is no sound and no picture coming from my TV. -Check that you have connected the TV power cord properly and switched the wall socket on. -Check that the power switch at the rear of the TV is set to "ON". -Check that you have turned on the POWER button on your TV.
If you're having problems Note: This page only refer to Video Graphics adaptor (VGA) problems. Problems and how to fix them The signal is out of range. -Change the resolution,horizontal or vertical frequency of your source(PC etc.). -Check whether the signal cable is connected from the PC to your TV properly. -Check the signal input source is connected properly. There is a vertical bar or stripe on my TV screen. -Turn on the auto configure or change the horizontal or vertical frequency position.
Your TV's specification 22 inch 0.24825(H) x0.24825( V) 1920 x 1080 16: 9 16.7M colours 1000:1 250cd/m 3.5 ms 170(H) /160( V) 100-240V~ 50/60Hz Power consumption 60 W 2x3W We want to improve our products all the time. We have the right to change the design and the specifications of this TV without telling you.The symbol below on the product or in the instructions means that you should throw your electrical and electronic equipment away separately from your household waste.
Wall mounting operation Attach the stand To attach the stand, place the stand on the neck of the TV, insert and tighten the screws in the circled area. Remove the Stand To remove the stand remove the screws in the circled area and the neck will come off. Mounting Specification 75mm 75mm Mounting Specification : 75mm x 75mm using screw size M4 (not supplied). Length of screw should not exceed 8mm. Please Note : The 8mm length of screw refers to how deep the screw can go inside the mounting holes.
Disposal of old electrical appliances The European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment.
