User guide

Configuring the Receiver Chapter 7
86 VideoJet 10
Password
A VideoJet 10 unit is generally protected by password to prevent unauthorized
access. You can limit the scale of access by choosing between different
authorization levels (User name:).
Note
Correct password protection is only granted when all higher levels of
authorization are also protected by password. If a user password is
assigned a service password must be assigned, too. Therefore assign
passwords always beginning with the highest authorization level.
User name:
The receiver operates with two user names: service and user which refer to
different authorization levels.
The user name service refers to the highest authorization level. Logged in under
service, you can use all functions of the VideoJet 10 and change all settings.
The user name user refers to the medium authorization level. Logged in under
user, you can connect the unit to a sender on the network and close the
connection, but no changes can be made to the configuration.
Password:
You can define and change a unique password for each user name if you are
logged on as service or if the unit is not protected by a password.
Enter a password for the chosen user name here.
Confirm password:
Re-enter the new password to prevent typing mistakes.