User guide

VideoJet 10 85
Configuring the Receiver 7
Basics
The VideoJet 10 offers various configuration options. Configuration in Expert
Mode with a Web browser is described below. Basic information about
configuration with a Web browser and other configuration options are described
in Chapter 5 of this user guide.
Unit identification
The unit can be assigned a name and an ID to facilitate identification. Both make
the task of managing several units in larger video surveillance systems with
VIDOS von VCS or other tools much simpler.
Unit name:
Enter a name for the unit here.
Note
The unit name is only used to identify a device remotely, for example in
case of an alarm call or when using a DNS server for easier device calling.
Enter a name that makes it as easy as possible to identify the location
unambiguously.
Unit ID:
Each VideoJet 10 should be assigned a unique identifier that can be entered here
as an additional means of identification.