User guide

Configuring the Sender Chapter 6
74 VideoJet 10
Note
Connection is only possible when both ends use the same encryption
parameters.
Connection state:
Here the connection state of the WLAN adapter is displayed. The following
messages are possible:
] No WLAN adapter found
] Connecting! Try to establish connection
] Connection successfully established with information on the data rate
Current transmission rate:
This text message box informs about the current transmission rate from the local
WLAN adapter to the remote device.
Note
WLANs do not guarantee a specific data rate, as it depends on the intensity
of the destination field. The de facto data rate is conditioned by the weakest
link within the WLAN.
Link quality:
The value indicates the quality of the current WLAN connection. A value of 100%
stands for best link quality to the next Access Point or remote device. A value less
than 15% indicates very poor quality at a critical limit.