User guide

Chapter 6 Configuring the Sender
VideoJet 10 67
Note
After selecting an option, the remaining parameters in the window are set
automatically and should not be altered.
Camera ID:
If necessary, adjust the ID for the peripheral device that is to be controlled (e.g.
dome camera or PTZ).
Baud rate:
Select the value for the data communication rate in Bit/s.
Data bits:
The number of data bits per character cannot be changed.
Stop bits:
Select the number of stop bits per character.
Parity check:
Select the type of parity check.
Interface mode:
Select the desired protocol for the serial interface.
Half-duplex mode:
Choose the setting appropriate for your application.