User guide

Configuring the Sender Chapter 6
66 VideoJet 10
] Contrast alarm
Triggering caused by a lack of contrast in the picture
Relay name:
A name can be assigned to the relay in this field. The name will be shown on the
button under Trigger relay. The Livepage can also be configured to display the
name next to the relay icon.
Trigger relay:
Click the button to switch the relay manually (for example for test purposes or to
operate a door opener).
COM1
The COM1: RS232/485serial interface port can be configured to meet your
requirements.
Serial port function:
Select a controllable device from the list. If you want to use the serial interface to
transmit transparent data, select Transparent. To operate the VideoJet 10 with
a terminal, choose Terminal.