User guide

Chapter 6 Configuring the Sender
VideoJet 10 61
Motion detector
The VideoJet 10 has an integrated video sensor which can detect changes in the
signal. Such changes are due primarily to movements in the camera's field of
view.
The sensitivity of the video sensor can be adjusted, so an alarm is generated only
if specified values are exceeded.
Note
The video sensor monitors Stream 1. For exact motion detection it is
recommended to choose CIF as video resolution for Stream 1 (see
page 41).
In order for the sensor to function, the following conditions must be met:
] The motion detector must be enabled.
] At least one sensor field must be activated.
] The individual parameters must be set for the operating environment and the
desired responses configured accordingly.
] The sensitivity must be set to a value greater than zero.
Warning!
Reflections of light (off glass surfaces, etc.), switching lights on or off or
changes in the light level caused by cloud movement on a sunny day can