User guide

Configuring the Sender Chapter 6
58 VideoJet 10
Format
You can delete all recordings on a partition at any time.
Warning!
Before deleting recordings, check them and back up any important
sequences to your computer's hard drive.
– Click Format to delete all recordings on the partition currently selected.
Alarm sources
You can configure the possible alarm triggers for the VideoJet 10 (e.g. the alarm
input).
Video loss alarm:
Select On if the unit is to activate an alarm whenever the video signal is
interrupted.
Contrast alarm:
The VideoJet 10 can trigger an alarm if the camera image shows too little
contrast, possibly indicating that the lens has been sprayed with paint or covered
in some way. Select On to enable this function.
Motion alarm:
Select On if the unit is to respond to a motion alarm.