User guide

Chapter 6 Configuring the Sender
VideoJet 10 57
Alarm recording at:
Here you can select the alarm sensors that should trigger an alarm.
Warning!
The alarm sensors must be activated for them to be able to trigger
recording: Configure and activate the motion alarm under Motion detector
(see page 61) and the alarm input under Alarm sources (see page 58).
– Click in the checkbox for the alarm sensor you want to trigger a recording. The
selected checkbox is marked.
Partition total size:
Indicates how much space the partition occupies on the storage medium.
Used filetracks on partition:
Up to 128 recording tracks are created automatically on a partition. Each new
recording is assigned a separate track.
Selecting the Linear mode option means that no more new recordings are made
after the 128 tracks have been used. Old recordings must be deleted before the
tracks can be re-used. Selecting Ring mode means that the 129th recording will
be written on the first track, so that the oldest recording is always overwritten by
the newest.
Remaining for recording:
Indicates the maximum time remaining for recording. It is automatically updated
after the parameters are changed.
Used space on partition:
Indicates the percentage of the partition that is already used.
Free space on partition:
Indicates how much space is still free on the partition.
Recording status:
The icon indicates recording activity on this partition. The icon is animated while
recording is in progress.