User guide

Chapter 6 Configuring the Sender
VideoJet 10 43
Warning!
The profiles are rather complex. They include a number of parameters that
interact with one another. Therefore it is generally best to use the profiles
as provided. The profiles should only be changed after you have
familiarized yourself with all the configuration options.
Note
The parameters as a group constitute a profile and are dependent on one
another. If you enter a setting outside the allowed range for the parameter,
the nearest valid value will be substituted when the settings are saved.
Profile name:
Enter a name for the current profile. The name will be displayed automatically in
the dropdown list of the field Active profile.
Data rate:
To optimize the use of bandwidth in the network you can restrict the data rate of
the VideoJet 10. The data rate should be chosen dependent on the picture quality
required.
Video quality:
Here you can adjust video quality as a function of the level of movement within
the frame. The Auto option automatically adjusts to the optimum relationship
between movement and image definition (focus). Manual allows you to set a
value between 1 and 31 on a slide bar. The value 1 gives the highest quality with
a low frame refresh rate. The value 31 results in a high refresh rate and low image
quality.
I-frame distance:
This parameter determines the number of inter-coded frames between two
I-frames.