User guide

Configuring the Sender Chapter 6
40 VideoJet 10
Time stamping:
This field sets the position of the time and date overlay. It can be shown at the
Top or the Bottom or you can define a position yourself via the Hyperterminal
and activate it choosing the option Custom. Or it can be set to Off if no overlay
for this information is to be shown.
Alarm mode stamping:
Choose On if a text message should be overlaid in the event of an alarm.
Displayed alarm message:
Enter the message to be displayed for an alarm. The field can contain up to 31
characters.
Video watermarking:
Choose On if the video images transmitted are to be "watermarked". After
activation, all images will be marked with a small green rectangle. A red rectangle
indicates that the sequence (live or saved) has been manipulated.
Picture settings
You can set up the video picture to meet your own particular requirements. To
enable you to control the current video picture it is shown in a small window
beside the sliders. The changes are effective immediately.