User guide

Chapter 6 Configuring the Sender
VideoJet 10 39
Camera name
The camera name simplifies identification of the remote camera location, for
example in the event of an alarm call. It will be shown in the video image if this
facility has been configured (see page 39). Moreover, the camera name is used
by VIDOS, VCS software for managing video surveillance systems, and makes it
easier to identify the camera.
Camera:
Enter a unique, unambiguous name for the camera in this field.
Display stamping
Various overlays or stamps in the video image provide important supplemental
information. These overlays can be enabled individually and arranged on the
image in a clear manner.
Camera name stamping:
This field sets the position of the camera name overlay. It can be shown at the
Top or the Bottom or you can define a position yourself via the Hyperterminal
and activate it choosing the option Custom. Or it can be set to Off if no overlay
for this information is to be shown.